Headless 5-String Bass Guitar Kit, 34 Inch Scale, Mahogany Body, Quilted Maple Veneer, Ebonized Fretboard

Full Specifications General Dexterity: Right-Handed Number of Strings: 5 Size: Full Size Build Difficulty: Intermediate (6/10) Quilted Maple veneer is thin and easy to sand through, so use a light touch at the edges Fixed bridge with pre-drilled mounting keeps intonation setup simple Bolt-on neck joint bolts straight on, so there is no gluing or clamping to get right Body Material: Ash Type: Solid Cutaway: Double Binding: None Top Veneer: Quilted Maple Neck Material: Maple With Skunk Stripe Joint: Bolt-on Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 34" / 864 mm Binding: None Fretboard Material: Ebony Radius: 12" / 305mm Number of Frets: 24 Fret Wire: Copper-Nickel Alloy Fret Size: Medium Jumbo Inlay Shape: None Inlay Material: None Headstock Shape: None Binding: None Nut: 5-String Locking Electronics Neck Pickup: Black Soapbar Bridge Pickup: Black Soapbar Controls: 1 Volume, 1 Tone Wiring: DIY (soldering required) Output Jack: Side jack Pickups: 2 S-style Pickups Hardware Bridge: Fixed, 5-Strings Tuners: Sealed, Diecast Pickguard: None Knobs: Black Plastic Cavity Covers: Black Strings: Steel Finish: Black What's in the Box Unfinished bass body, routed for two soapbar pickups and a rear control cavity Bass neck with fretted dark fingerboard and a black string-anchor block at the end, no headstock 2x black soapbar pickups with lead wires 5x individual black single-string bridge units 1x pre-wired control harness with potentiometers and hookup wire 1x black jack plate with output jack 2x dark knurled dome knobs 1x black rounded rectangular control cavity cover 1x black neck plate with four screws 2x chrome nuts and 2 washers 1x set of five bass strings 2x black strap buttons with screws 1x guitar cable with one angled plug 1 bag of assorted mounting screws What You'll Need You will need to solder the electronics. Depending on the finish you choose, the tools below cover a standard build. For assembly: Phillips screwdriver, Allen wrench set For wiring: Soldering iron, solder, wire cutters For finishing: Sandpaper (220-600 grit), primer, paint or stain, clear coat For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut. New to headless builds? We filmed a complete headless build, 23 short videos from unboxing to final setup. It is shot on our mahogany body HSS kit rather than this one, so your hardware and pickup layout may differ, but the headless parts that trip people up are the same: how the bridge tunes, how the neck-end clamp holds the string, and the order you string it in. Headless Guitar Kit Assembly Manual, the full written guide with all 23 videos Watch the whole series on YouTube Ask a question in the builder community