318984-753 Inducer Draft Motor for Carrier

Shipping Info Same Day Shipping  If you place your order between Monday - Friday before 3 p.m., your order will be shipped on that day. If you order on Saturday before 12 p.m., your order will be shipped on that day. If you place your order outside these times, call us at 1-802-727-4126 and we will do our best to get it out the door.   Quick Delivery, All Over The Country We ship to 61% of the country in just 2 business days - See Shipping tab for more information!  Free shipping includes Saturday and Sunday delivery. 3-day delivery from the East Coast all the way to the rocky mountains and more!   We Stay On Top of It We are using the most reliable options available. Even though all major carriers are experiencing delays, we are always happy to help. If you have a question about the status of your shipment, call us directly for the quickest response at 1-802-727-4126.   We’re Always Happy to Help Our support team can be contacted via email at Suppot@snap.parts, or you can call us at 1-802-727-4126 during business hours. In the event that you need support outside of business hours, snap.parts has an instant message support chat that can help you solve any problem. Description Cross Reference Information 318984-753. 2347563, 3195827, HC21ZE117, K674, 10704, TJ318984-753, AP5634784, 318984753, 323435-730, 323435730, 323435-724, 323435724, 323435-701, 323435701, HC21ZE114, 321373-712, 321373712, HC21ZE114A, 321373-711, 321373711, 321373-710, 321373710, 321373-709, 321373709, 321373-708, 321373708, 321373-707, 321373707, 321373-706, 321373706, 321373-705, 321373705, 321373-704, 321373704, 321373-702, 321373702, 321373-701 & more! Quality you can Trust! All Snap Products are made with premium materials and are tested so they last. Compatible with the following HVAC brands: Carrier. Wire Harnesses This PRYSM inducer motor comes with extra wire harnesses to fit a variety of different models. Please note, no installation screws are included. Instructions Included Easy to follow step by step instructions are included in the box Installation Instructions Installation Instructions for 318984-753 Disconnect electrical power supply to the appliance Remove the access panel to the HVAC System Remove motor from housing by removing all the screws holding it in place, typically, 3-4 Pull motor out and unscrew wheel from motor shaft. (there is a gap in the wheel to reach). If you cannot get screw to budge stop here and buy the wheel that goes with it. If you cannot get the wheel to come off use a saw to cut the shaft from the old motor. Unscrew the 3 screws holding the motor to the plate plus ground wire Flip motor over remove 2 screws holding motor to second plate Take motor out and put new one in place and start screw the 2 plates back on Once motor is secured to the 2 plates attach the wheel to the shaft. Make sure you test that the wheel is tight and will not slip on shaft! Attach plastic wheel to back of motor and secure it in place with the metal clips. Hand spin wheel to make sure everything rotates smoothly with no wobble Install motor back into the HVAC unit attach cords to the 2 terminals and give it a test! Shipping