3 Filamet™ Sampler

3 Filamet™ Sampler is available as 1.75mm and 2.85mm filament. It contains 100g samples of Bronze, Copper, and Stainless Steel 316L Filamet™. Bronze Specs: It contains 88.0% - 90.0% metal and has a density of 4.29g/cc - 4.5g/cc. Copper Specs: It contains 87.0% - 90.7% metal and has a density of 4.8g/cc - 5.0g/cc. Stainless Steel 316L Specs: It contains 80.0% - 85.0% metal and has a density of 3.5g/cc. High Compatibility: This Filamet™ enables any open-architecture Fused Filament Fabrication 3D printer to produce metal objects. Even works in 3D printing pens! Easy to Print, All you need is: Any FFF/FDM 3D Printer. A 0.6mm hardened steel nozzle. A Filawarmer, and a model to print. Prints just like regular PLA. Place your spool so that the filament coming off is going straight into the extruder. The flow rate in your slicer may need to be adjusted up to 135%. Little to no warping occurs during printing. Advanced Properties: Filamet™ is less hygroscopic than regular PLA. Filament dryers have adverse affects on Filamet™. Spools should not be dried. Fully Sinterable Metal Filament: Once fired in a sintering furnace, the result is 100% metal. Instructions for sintering these products. Special Qualities: 3 Filamet™ Sampler includes the easiest materials to print and sinter. Perfect material to begin with. Eliminate tooling and machining costs for short run manufacturing, prototyping, and one-off metal part needs. Note: All sales final except in cases of defective product.