3-Digit Numerical LED Identification Board

The Vision X 3-Digit LED Vehicle Identification Board provides bright, reliable equipment identification for mining, construction, quarrying, material handling, and other heavy-duty industrial operations. Designed for continuous 24/7 use, it allows operators and site personnel to identify vehicles quickly in darkness, dust, rain, and other demanding working conditions. Each of the three independently controlled digits uses 195 high-output LEDs to produce a crisp, highly visible number. An extra-wide 120-degree viewing angle helps personnel identify equipment from a broad range of positions rather than needing to stand directly behind the vehicle. Automatic day and night brightness adjustment maintains visibility during daylight while reducing unnecessary glare in low-light conditions. Numbers can be changed in seconds without opening the housing, connecting a computer, or repainting the vehicle. Simply touch the supplied magnet to the sensor beneath each digit to cycle that position from 0 through 9. Each digit has its own magnetic sensor, allowing the displayed vehicle number to be updated independently. An internal memory function retains the selected number when power is removed. The board is built around a rugged aluminum housing with a durable polycarbonate lens. IP68 and IP69K ingress-protection ratings help protect the assembly against dust, water immersion, and high-pressure washdown, while a 21.2 Grms vibration rating supports installation on haul trucks and other equipment exposed to severe vibration. Modular mounting brackets and installation hardware are included. Key Features High-Visibility 3-Digit Display Three independently controlled numerical positions provide clear vehicle and equipment identification from long distances. 195 High-Output LEDs Per Digit Each digit uses 195 LEDs to produce bright, clearly defined numbers, with independent digit operation helping preserve identification if an adjacent section is damaged. 120-Degree Extra-Wide Viewing Angle Allows equipment numbers to be seen from a broad range of viewing positions around busy job sites. Automatic Day and Night Brightness The board automatically adjusts between bright daytime output and reduced nighttime output for consistent visibility around the clock. Tool-Free Magnetic Number Selection Touch the supplied magnet to the sensor beneath each digit to cycle that position from 0 through 9. Number Memory An internal memory function retains the selected identification number after the vehicle or board is powered down. Built for Continuous Industrial Operation Engineered for 24/7 use on mining, construction, quarry, and heavy-equipment applications. Heavy-Duty Environmental Protection IP68 and IP69K protection, a rugged aluminum housing, polycarbonate lens, and 21.2 Grms vibration rating help the board withstand harsh operating environments. Multiple LED Colors Available in amber, blue, green, and red to support fleet, department, vehicle-type, or site-specific identification systems. Specifications Display Configuration: Three numerical digits Number Range: Each digit independently selectable from 0–9 LEDs: 195 LEDs per digit; 585 LEDs total LED Type: 5050, 0.2W Available Colors: Amber, blue, green, and red Viewing Angle: 120 degrees Brightness Control: Automatic day/night dimming Number Selection: Magnetic sensor, independently controlled per digit Memory: Retains selected number after power is removed Wattage: 117W Amp Draw: 9.75A at 12V Operating Voltage: 12–36V DC Connector: 3-pin Deutsch DT connector Operating Temperature: -40°F to 176°F (-40°C to 80°C) Rated Lifespan: 50,000 hours Dimensions: 29.84 x 17.26 x 1.41 in. (758 x 439 x 36 mm) Fixture Weight with Brackets: 27 lb. (12.25 kg) Shipping Weight: 30 lb. (13.61 kg) Mounting: Modular mounting brackets Housing: 6061 aluminum Housing Color: Black Lens: Polycarbonate Ingress Protection: IP68 / IP69K Vibration Rating: 21.2 Grms EMC Emissions: CISPR 25 Class 1 Warranty: Three-year commercial-market warranty Available Part Numbers MIL-ID03A: Amber MIL-ID03B: Blue MIL-ID03G: Green MIL-ID03R: Red Downloads Download the Product Specification Sheet Download the Installation Instructions What’s Included One 3-digit LED vehicle identification board in the selected color Modular mounting brackets Mounting hardware Magnetic number-selection tool Installation should be completed by qualified personnel in accordance with applicable site, vehicle, and company electrical requirements. Disconnect and lock out electrical power before beginning installation.