250 SQ. FT. COMPLETE EPOXY/POLYASPARTIC FLAKE FLOOR KIT

INSTALLATION INSTRUCTIONS INSTRUCTIONAL VIDEO VIDEO OF CONTRACTOR INSTALLING THIS SYSTEM WITH CFS-2C POLYASPARTIC TOPCOAT POTLIFE WARNING: DO NOT LEAVE MIXED EPOXY IN THE BUCKET, EPOXY WILL SET WITHIN 15 MINUTES IF LEFT IN BUCKET.  POUR ON FLOOR IN STRIPES IMMEDIATELY AFTER MIXING FOR LONGEST WORKING TIME +/- 40 MINUTES. 250 Sq. Ft. Complete Epoxy Flake Floor Kit includes 4-1/2 gallons of epoxy for up to 250 square feet of floor. 1-1/2 gallons CFS-Low Viscosity Primer (Vapor barrier rated up to 3 pounds per 1000 ft.² of vapor transmission) 1-1/2 gallons CFS-Intermediate Coat Includes 40 pounds of blended flakes, available in  1/8″ | 1/4″ | 1/2″  sizes 1 pint tabular alumina non-skid additive (aluminum oxide) 1-1/2 gallons CFS-UV Clear Epoxy Top Coat: High gloss, NOT 100% UV stable, Low Odor, Slow Setting, very easy to install. OR Upgrade topcoat to: 2 Gallons CFS-2C Polyaspartic: Two component, High Gloss, 100% UV stable,  slow set, easy to install, 35-45 minute working time, very low odor.(This coating is California / scaqmd compliant) **CFS-2C Polyaspartic can only be used as a clear topcoat over full flake coverage when purchasing with the complete epoxy flake floor kits. Using CFS-2C Polyaspartic over smooth surfaces can cause surface tension issues which may result in fish eyes forming in the coating.  **THIS FLAKE BLEND CAN BE VERY CHALLENGING TO INSTALL, SHOWS INCONSISTENCIES, MAY LOOK PATCHY, WILL SHOW CLOUDINESS IF TOPCOAT IS APPLIED TOO HEAVY.** *YOU CAN ADD 1 PINT OF XYLENE PER 2 GALLON KIT OF CFS-2C FOR INCREASED WORKING TIME AND REDUCTION OF ROLLER LAP MARKS (DO NOT SUBSTITUTE ANY OTHER SOLVENT, THERE WILL BE AN ODOR FROM THE SOLVENT) 2 Gallons CFS-1C Polyaspartic: Single component, High Gloss, 100% UV stable, Very High Odor, slow set, 30-40 minute working time. FLOOR MAINTENANCE GUIDE 250 Sq. Ft. Complete Epoxy Flake Floor Kit includes 4-1/2 gallons of epoxy, 30 mil thickness (the 30 mil thickness does not include the additional +/- 40 mil thickness of flake which is included with this system. Total thickness of the system is +/- 72 mils)  380+ decorative flake options to choose from. Please call our office for assistance customizing your own blend. FULL SIZE EPOXY COLOR CHART FULL SIZE DECORATIVE FLAKE BROCHURE Colors are digital representations, and may vary from actual colors. TECHNICAL DATA SHEETS: CFS-LOW VISCOSITY PRIMER CFS-INTERMEDIATE COAT CFS-UV CLEAR EPOXY CFS-2C TWO COMPONENT POLYASPARTIC TOPCOAT CFS-1C POLYASPARTIC SAFETY DATA SHEETS: CFS-LOW VISCOSITY PRIMER CFS-INTERMEDIATE COAT CFS-UV CLEAR EPOXY CFS-2C TWO COMPONENT POLYASPARTIC TOPCOAT CFS-1C POLYASPARTIC ALUMINUM OXIDE Additional videos of this system being installed: Video 1 Video 2 Video 3 Video 4 FREE SHIPPING