25 lbs M2 Performance Stainless Steel Mantus Anchor

25 lbs M2 Performance Stainless Steel Mantus Anchor is the roll-bar-free model for a cleaner fit on many pulpits, bowsprits, slotted housings, and tighter rollers. It weighs 25 lb (11.3 kg) and uses 2205 duplex stainless-steel shank and 316L stainless-steel fluke, shot-peened and electro-polished. 25 lbs M2 Performance Stainless Steel Mantus Anchor specifications Model: Mantus M2 Performance. Anchor weight: 25 lb / 11.3 kg. Finish and construction: stainless steel; 2205 duplex stainless-steel shank and 316L stainless-steel fluke, shot-peened and electro-polished. Assembly and storage: Rear foils, nose ballast, and shank geometry help the anchor roll upright; the shank and fluke separate for storage with a single load-bearing bolt. Day use under 30 knots: 30–35 ft, under 15,000 lb loaded displacement. Cruising use under 50 knots: 25–30 ft, under 11,000 lb loaded displacement. Storm use over 50 knots: 20–25 ft, under 5,000 lb loaded displacement. Use the complete M1 and M2 size guide, verify the current manufacturer table, and print the exact model and weight fit template. Match boat length and loaded displacement, then account for windage, bottom, rode, intended use, and physical bow fit. The 25 lbs M2 Performance Stainless Steel Mantus Anchor is covered by Mantus’s qualified limited warranty for the original owner; galvanizing is covered for three years. Proof of purchase and exclusions apply.