5x108 Wheel Spacers V3

These are designed to fit Volvo's that have a 5 x 108 bolt pattern and 65mm center bore.  That is all 200, 700, 900, 800, p80, and p2 chassis. New with V3:   relief slots for tool access if spacers get stuck on hubs or rotors.    Wheel Spacers Available in ***10mm, 15mm, 20mm, 25mm, and 32mm thickness CNC Machined from 6061-T6 Aluminum Weight reduction pockets reduce rotating and unsprung mass.   Hubcentric design allows for vibration-free mounting of wheels at various offsets. Black Anodized 5 x 108mm Pattern with a 65.1mm Center Bore Made in the USA Sold in quantities of 2 Product notes: *** The 10mm wheel spacers have an extended hub centering ring, which is required to clear the wheel hub.  If you plan to use these you MUST verify that they sit flat on the wheels you plan to use,  Many wheels may need the inside chamfer enlarged to clear the wheel spacer.   *** All of these products require extended-length wheel studs and are not compatible with the factory length wheel studs.       Comparison:  Products  Kaplhenke Wheel Spacers & Extended Wheel Studs  Generic Wheel Adapters Weight Our pocketed wheel spacers are lighter Wheel adapters are heavier and contain more metal Strength High strength steel studs pressed into the factory steel hub Wheel Studs pressed into an aluminum spacer Reliability 5 Lug nuts & studs / corner w/ ease of checking tightening torque 10 Lug nuts & studs / corner w/ only half being able to be easily checked for fastening torque.   Studs pressed into aluminum. Easy of Change Initial installation requires pressing in of studs but every other time a wheel spacer is changed it can be done in seconds. Faster initial installation but requires 2x the work to change wheel spacers every time a wheel adapters are changed.