RYDE™ 2024+ for Street Glide (Polycarbonate)

We redesigned to the Mega match the new styling while maintaining exceptional wind protection and a comfortable ride.  Our Mega Elite Series polycarbonate windshields eliminate buffeting and provide a quieter ride.  Stand-offs, cover plates, and hardware are included with the windshield. LRS Recurve Windshields are made from the highest optical grade acrylic and polycarbonate materials, allowing for a crystal clear look not only on the bike but for rider's view as well. Specs: Width: 22" Thickness:  (.135") Material - Polycarbonate Recurve: Yes Tints: Clear, Light, Dark Sizes:  10", 13" Fitment:  FITMENT: 2023-2024 Harley-Davidson CVO Street Glide (FLHXSE),                      2024 Harley-Davidson Street Glide (FLHX) Install: Remove the factory shield using T25 Torx bit Remove the factory risers from the fairing using T25 Torx bit. (You must remove the bolts then pull off the cover of the fairing and unscrew the risers from the back)    Replace the factory risers with LRS risers secured with factory hardware.  The risers will only fit in one direction.  There are little notches in the fairing that fit with the risers to help guide it into place. Place the LRS shield on the fairing Place the cover plate and secure one side at a time.  Hand start the threads then torque to hand tight using a 3mm Allen Key/Wrench.     Download the install guide here  Remember: LRS Recurve Windshields are made to be looked over, not though. *All Windshields are designed and made by Long Ride Shields out of Sparks Nevada, USA.* *All measurements are approximate. These may differ depending on material shrinkage when formed.*