225 Galaxy | 1/8 Gap

The 225 Galaxy is one of the 4 multi-strength fasteners. Uniquely designed as a snap-in fastener for 1/2”-3/4” wood panels. Each insert has a set number of waves that determine the holding strength, while still allowing 1/8” of movement for expansion and contraction. This means the Galaxy fasteners will hold larger panels that have more movement. The Galaxy fasteners work with any screw from the 200 Series with a 1/8” neck multiplying the various application possibilities. Like our popular 320 Zero there is no requirement to drop and lock, the panel snaps straight onto place. DESCRIPTION The 225 Galaxy is one of the 4 multi-strength fasteners. Uniquely designed as a snap-in fastener for 1/2”-3/4” wood panels. Each insert has a set number of waves that determine the holding strength, while still allowing 1/8” of movement for expansion and contraction. This means the Galaxy fasteners will hold larger panels that have more movement. The Galaxy fasteners work with any screw from the 200 Series with a 1/8” neck multiplying the various application possibilities. Like our popular 320 Zero there is no requirement to drop and lock, the panel snaps straight onto place. INSTALLATION The Galaxy is a disc shaped, snap-in insert, that compression fits into a 1-1/4" drilled hole at 3/8” depth. (Best milled with a 1-1/4” Forstner Bit if installed in the field) The Galaxy fits into place using a mallet or press. There is a small rim to help flush the insert with the surface of the material. The 229 Galaxy Alignment Pin is then inserted and used to mark the location of the adjacent screw. The 234 Euro Screw (or compatible 200 Series Screw) is installed into the marked location. The head of the screw is then ready to snap-in the center of the Galaxy. This connection can withstand repeated removal. Note: Excessive removal will reduce the holding strength over time. Note: The 225 Galaxy has a 25lb weight limit per insert. Not recommended for overhead use without a safety lanyard or authorized hardware. SPECIFICATIONS Includes the 234 Mounting Euro Screw unless specified without screws BENEFITS: Removable & Hidden, Multiple Strengths to choose from, Fast & Easy field installation, Prefabricated Panel & Furring systems pack flat for shipping, allows 1/8” expansion, minimized measuring with the 229 Alignment Pin. SUGGESTED MATERIALS: Wood Panels 1/2”-3/4”, Acoustic Panels, Frames, Trim, Plywood, Particle Board/MDF, Plastic, Solid Surface, Steel, Composites, etc. FASTENER TYPE: Compression Fitted, Center Snap-In PANEL REMOVAL: Vacuum Cup, Pry Bar DISTANCE FROM WALL TO PANEL: 1/16” REQUIRED REVEAL: “0” none SPACING: Approx. 24” o.c. to prevent warping MAXIMUM PANEL SIZE: 4’ x 8’ HOLE SIZE: 1-1/4” Diameter, 3/8” Deep (Suitable for 1/2”-3/4” material) MATERIAL: High Impact, ABS Plastic | Color Light Gray SCREW REQUIREMENTS: #10 Pan Head protruding 3/16” (Star Hanger Systems make a collection of screws with preset depths specified as 1/8” Gap with a 1/16” permanent washer and a #10 pan head. These screws can be found in the 200 Series) TESTED STRENGTH RATING 224 Galaxy, Horizontal Pull Off = 75 Pounds | Vertical Weight Holding = 30 Pounds 225 Galaxy, Horizontal Pull Off = 60 Pounds | Vertical Weight Holding = 25 Pounds 226 Galaxy, Horizontal Pull Off = 40 Pounds | Vertical Weight Holding = 20 Pounds 227 Galaxy, Horizontal Pull Off = 30 Pounds | Vertical Weight Holding = 10 Pounds 225 Galaxy, Alcove Wall Panels (pdf) 225 Galaxy, Hospital Headwall (pdf) 225 Galaxy, Elevator Panels (pdf) 225 Galaxy, Solid Surface Desk, Reveals (pdf) 225 Galaxy, Complex Wall Panels (pdf) 226 Galaxy, Solid Surface (pdf) 226 Galaxy, Heavy Acoustical Panel (pdf) 227 Galaxy, Exterior Sign (pdf) 750 Tapered Shim, Furring Shims (pdf) 225 Galaxy, V5, As Built (pdf) 225 Galaxy, V5, As Built (dwg) 225 Galaxy, V5, As Built (stp) 224-227 Galaxy Spec Sheets 2024 (pdf)