2026 CORE CFS ELXR Front Wing

Wave Foil • Parawing Foil • Mid Aspect • Surf-Oriented Performance 2026 CORE CFS ELXR Front Wing Uncompromising flow, efficient glide and powerful pumping for riders who want to turn wave energy directly into forward drive. The 2026 CORE CFS ELXR Front Wing is a dedicated mid-aspect wave and parawing foil wing built for riders chasing a free, surf-oriented feel. Its powerful profile creates early lift at low speed, maintains energy through turns and supports efficient pumping between waves without relying on constant pull from a wing or parawing. With a moderate aspect ratio, reduced pitch stability and high resistance to ventilation, the ELXR balances glide, agility and control for dynamic carving, connected rides and pure foil flow. Wave & Parawing Front Wing Mid-Aspect Design Early Low-Speed Lift Efficient Pumping Surf-Oriented Turns Ventilation Resistance Full CFS Compatibility Sizes 650–1250cm² Why You’ll Love the CORE ELXR Built Around Pure Wave Energy The ELXR converts wave energy into forward drive, helping you maintain speed and flow without needing constant pull from a hand wing or parawing. Early Lift at Low Speed Its powerful foil profile generates useful lift early, helping riders get flying in smaller waves, slower swell and lighter wind conditions. Efficient Wave-to-Wave Pumping Reduced pitch stability and a pump-focused profile let the foil move freely through the water, making it easier to carry speed and connect sections. Dynamic Surf-Style Turning The moderate aspect ratio balances glide with roll freedom, allowing fast direction changes, tight carving and a more active surf-inspired ride. Wave & Parawing Performance Efficient Glide The ELXR carries speed through flatter sections and between waves, helping extend rides and reduce the effort needed to remain on foil. Powerful Pumping A low-speed lift profile and freer pitch response help transform rider input into forward movement for efficient wave connections. High Maneuverability Greater freedom in pitch and roll gives riders the control needed for dynamic bottom turns, cutbacks and surf-style direction changes. Controlled Tip Breaches High resistance to ventilation helps the foil maintain controlled flow if a wingtip briefly breaches the surface during hard carving. CORE ELXR Sizes & Specs Size Surface Area Span Aspect Ratio General Wave Range General Wind Focus 650 650cm² 72cm 8.0 Chest-high to overhead, medium-steep waves Strong wind 750 750cm² 78.5cm 8.2 Waist-high to overhead, medium-steep waves Moderate to strong wind 850 850cm² 86.5cm 8.8 Knee-high to chest-high, flat to medium-steep waves Light to strong wind 950 950cm² 91.5cm 8.8 Knee-high to waist-high, flat to medium-steep waves Light to moderate wind 1050 1050cm² 96cm 8.8 Knee-high to waist-high, flat to medium-steep waves Light wind 1250 1250cm² 100cm 8.0 Knee-high to waist-high, flat to medium-steep waves Very light to light wind Rider-weight note: CORE recommends that riders weighing 85kg / 187lb or more generally choose one size larger to achieve comparable lift and performance. Which ELXR Size Should You Choose? 650 — Maximum Speed & Control Best for lighter or highly skilled riders in strong wind and steeper, more powerful waves who want the tightest turns and least surface area. 750 — Powered Wave Performance A strong choice for medium-to-strong wind, steeper waves and experienced riders who want speed with slightly more low-end support than the 650. 850 — Versatile Performance Size A broad-range option that balances glide, pumping and maneuverability for many riders across small-to-medium waves and varied wind strengths. 950 — Glide & Easy Connections Designed for riders wanting stronger low-speed lift, efficient pumping and easy wave connections without losing the ELXR’s surf-oriented turning character. 1050 — Light-Wind Wave Flow A higher-lift option for smaller or flatter waves, light wind and riders who prioritize early takeoff and sustained glide. 1250 — Maximum Low-Speed Support The largest ELXR provides the earliest lift and greatest low-speed support for heavier riders, very light wind, small swell and prone-entry sessions. Need help choosing a size? Contact Windance with your weight, board volume, foil experience, typical wave height and local wind range. We can help narrow the ELXR range to the most appropriate option. Shape & Performance Concept Profile-Driven Design CORE built the ELXR around its foil profile rather than chasing aspect ratio alone, prioritizing useful low-speed lift, energy retention and dynamic riding. Moderate Aspect Ratio Aspect ratios from approximately 8.0 to 8.8 balance efficient glide with roll response, pumpability and surf-style control. Reduced Pitch Stability Less locked-in pitch behavior gives the rider greater freedom to pump, redirect and follow the shape of the wave. Consistent DNA Across Every Size Every ELXR size is tuned to preserve the same core handling character, so selection is based mainly on rider weight, conditions and wave size rather than discipline. Carbon Construction Multi-Layer Carbon Laminate A multi-layer carbon laminate balances low weight, structural stiffness and durability for direct response and consistent foil performance. Individually Engineered Sizes Each surface area has its own optimized shape and internal construction, preserving the intended ELXR handling across the complete range. Wood-Core Sizes The 650, 750 and 1250 use a wood-core construction selected to achieve the desired balance of flex, strength and response. Epoxy-Core Sizes The 850, 950 and 1050 use an epoxy core. CORE states that both internal constructions deliver the same riding characteristics. CORE Compatible Foil System Full CFS Compatibility The ELXR works with all CORE CFS masts, fuselages and stabilizers, allowing riders to build and tune a complete foil around their preferred riding style. Carbon or Aluminum Mast Pair the ELXR with a CFS Carbon Mast for maximum stiffness and response or a CFS Aluminum Mast for a durable, versatile and value-focused setup. Recommended ELXR Setups Maximum Surf Freedom Pair the ELXR with the 60cm CFS fuselage and 160cm² stabilizer for greater pitch freedom, efficient pumping and the most dynamic surf-oriented feel. Choppy-Water Stability Use the 64cm fuselage with the 190cm² stabilizer for more stability across pitch, roll and yaw while retaining responsive wave performance. More Stability & Control Larger stabilizers and longer fuselages increase control and tracking but reduce some of the ELXR’s loose, agile and surf-oriented character. Recommended Board Style CORE recommends midlength foil boards such as the Roamer S from 78L or the Chase, with final board volume selected around rider weight and skill. Who Is the CORE ELXR For? Best Rider Profiles Wave foilers focused on carving, lines and flow Parawing riders who want efficient low-speed lift Riders connecting multiple waves through pumping Foilers who prefer active pitch and roll control Experienced riders seeking a surf-oriented front wing Riders already using or building a CORE CFS setup What You’ll Notice on the Water Early lift at lower speeds Strong glide through flatter sections Efficient pumping between waves Quick roll response for carving More freedom in pitch control Controlled flow during brief tip breaches Performance note: Reduced pitch stability gives the ELXR a freer, more dynamic ride but requires more active rider input than a highly stabilized beginner foil. What’s Included Included with the ELXR 2026 CORE CFS ELXR Front Wing Premium fitted protective front-wing cover You’ll Still Need Compatible CORE CFS fuselage CFS mast and mast base CFS stabilizer Compatible foil board Three M8x22 mounting screws supplied with the CFS fuselage Hardware note: The three M8x22 screws used to attach the front wing are supplied with the CFS fuselage, not with the ELXR front wing. 2026 CORE CFS ELXR Front Wing FAQ What is the CORE ELXR designed for? The ELXR is a dedicated wave and parawing front wing designed for early lift, efficient pumping, connected rides and dynamic surf-oriented turns. What sizes are available? The ELXR is available in 650, 750, 850, 950, 1050 and 1250cm² sizes. Is the ELXR a high-aspect foil? No. CORE describes it as a mid-aspect wave front wing, with aspect ratios ranging from approximately 8.0 to 8.8 depending on size. How should I choose an ELXR size? Choose based on rider weight, wave size, wind strength and desired low-speed lift. Riders over 85kg should generally consider one size larger. Is the ELXR good for pumping? Yes. Its powerful low-speed profile and reduced pitch stability are designed to support efficient pumping and easier connections between waves. What fuselage and stabilizer does CORE recommend? CORE recommends the 60cm fuselage with the 160cm² stabilizer for maximum freedom and pumping efficiency, or the 64cm fuselage with the 190cm² stabilizer for more stability in chop. Is the ELXR compatible with all CFS components? Yes. The ELXR is part of CORE’s Compatible Foil System and works with all CFS masts, fuselages and stabilizers. Does the ELXR include mounting screws? No. The front wing includes a protective cover. The three M8x22 mounting screws are supplied with the CFS fuselage. Can Windance help build a complete CFS setup? Yes. Contact Windance with your weight, board, foil experience, local conditions and riding goals, and we can help match the ELXR with the right mast, fuselage and stabilizer. Why Choose the 2026 CORE CFS ELXR? The 2026 CORE CFS ELXR Front Wing is built for riders who want to stop thinking only about lift and speed and start focusing on lines, turns and flow. Its powerful profile, efficient glide, low-speed lift, ventilation resistance and freer pitch response create a wave-focused foil that pumps efficiently, carries energy through turns and integrates fully with CORE’s modular CFS platform.