CARLI SUSPENSION 2019+ 2500 Power Wagon Pin-Top System

The best bolt on Power Wagon suspension system on the market, the Carli Suspension 3.25" Pintop system dramatically improves on road comfort, but more importantly makes your Power Wagon even more capable in the dirt. Whether it's low speed crawling or high speed desert running, this system can tackle it with 9.3" of front travel, 11" of rear travel and completely custom spec King shocks. You can also option it with Carli's high capacity coils, which are perfect for trucks running roof top tents and camping setups.  Designed from the ground up for the serious adventurer, the Pintop 2.5 features excellent road manners while providing the comfort and control needed on those long unforgiving trails, and high speed off road driving. Keeping the factory geometry in check is a host of upgraded components that have been scrutinized for strength, function, and longevity.  The Details: This system boasts Carli specific, blueprinted, King 2.5” shocks on all four corners. In an effort to provide customers with the best product, Carli designed a custom piston to determine proper base flow rates to ensure the shock works well in the heavy duty truck platform; they then tuned the shocks around the custom pistons based on the only thing that matters to us, seat-of-the-pants feel. These shocks completely mute the axle hop and chatter that plague the stock Power Wagon platform in soft soil or sand. Carli rounds off ALL King shocks with shafts machined and polished from a solid piece of 17-4 Stainless. Unlike King’s standard shafts, there is no coating to wear off, weather is far less likely to hurt them and if there is a small chip, you can round the edges with emery cloth to ensure the seal housing isn’t damaged as they’re not brittle like the stock, hardened shafts. The shocks are finished with King oil good to -55° F.  Your truck will sit 2” higher in the front (cab configuration dependent) with more suspension travel than the factory platform thanks to the taller, lighter rate coil springs. The rear Carli Coil Springs will lift 1”  to level the truck while upping the rear suspension capacity to a respectable 2,000lbs. If more capacity is desired, we also offer the R2 high capacity rear coils which are perfect for trucks with full time camping setups.  The Factory Power Wagon Sway Bar Disconnect and sway bar are retained with this system and functions just like factory!  The additional front lift and off-road oriented application call for a better track bar to handle the increased off-road abilities. This system includes an Adjustable Track Bar to recenter the axle and provide a stronger link with less deflection for the lifted application. Also included are Carli’s Radius Arm Drop Brackets to drop the pivot point of the dual pivot Power Wagon arms, alleviate diagonal spring pressures (ensure no bow in the coil springs) and allow full adjustment of the factory caster bolt. Many lower cost options skip this part, but we feel it's a necessary item to maintain proper caster and arm angle with the added front suspension travel and articulation.  Everything is included to support flawless operation of all components. Extended rear Sway Bar End Links, Front and Rear Bump stop drops to ensure the shocks are cycling in their designed travel range.  We offer two mandatory option selections for the rear of the truck. The first is coils. Select the R2 high capacity coils if you have 500-800 pounds of constant payload, and the R1 coils if you have an empty truck with variable load like towing. If you want to maintain capacity, just all the Full Travel Airbag kit. We also offer two rear track bar options. Select the track bar drop to net a lower total cost, or the Carli full replacement rear track bar system upgrade to have the best handling and eliminate the rear "wag" these trucks can exhibit. We highly recommend the full rear track bar if you need R2 high capacity coils or tow regularly.   This system also includes several small parts that no other brand offers including a Harmonic Damper Relocation Bracket and Skid Plate Spacer Block to prevent the drive shaft from being damaged by the skid plate with the added droop travel this system offers.  Wheel and Tire: This system will fit up to a 37” tire when utilizing wheels that are no more than 9” wide with 5.75-6” of backspacing. A 12.5” wide should fit with no rubbing on the factory radius arm and only minor trimming required, while a 13.5” will require more trimming and slightly more offset to fit properly. 35” tires will fit with VERY minimal, if any trimming. We Recommend running a 17”/18” diameter wheel for optimal ride quality (more rubber = better small bump compliance) on a 35”-37” E-rated tire running 45psi front, 40psi rear when unloaded. For more details, see our article on wheel and tire selection and tire pressures. SKU: CS-DPT25-19-PW Dodge 2" Pintop 2.5 System, Power Wagon, 2019+ Base Kit. Base Kit Includes: CS-DEL-R-14 Rear Sway Bar End Links CS-DFBD-1 Front Bump Drops CS-DLRC-14-H Front Linear-Rate Coil Springs CS-DMRC-14-R1 Rear Multi-Rate Coil Springs CS-DATB-1419 Front Track Bar CS-DRAD-14 Radius Arm Drops CS-DCM-20-HK Transmission Crossmember, Extended Hardware Kit CS-DRBD-AL Rear Bump Drops CS-DPRBDROP-14-R Rear Track Bar Drop CS-DPT25SPKG-14-H Carli Tuned King 2.5" Remote Reservoir Pintop Shock Package with Reservoir Mounts, Stainless Shafts, Brake Line Tabs CS-DVDBRKT-19 Harmonic Damper Relocation Bracket CS-DARMORBLK-19 PW Skid Plate Spacer Block Front Lift Rear Lift Front Travel Rear Travel Shock Diameter Tire Fitment 2.0″ 1″ 9.3″ 11″ 2.5″ 37″