2015-2023 Car R3 QuickRun Hellcat Harness (HQR-1005R3HC)

Tech Specs Plug and Play into your existing Hellcat engine 2015-2023 Car Hellcat harness Wire Ends labeled so you know where to connect (12V+, Ground, Fuel Pump, Starter, etc.) Designed 100% by Sublime Technologies, for maximum protection against abrasion and high temps in the engine bay. All of our products come with the best Sublime tech support and customer service for your hemi swap! Current Transmissions supported - All manual transmissions. We currently DO support the NAG1 or 8HP. For these transmissions, we recommend using our QuickHemi engine harness and Sound German Automotive Transmission Controller Utilizes full command of your fuel pump, without Fuel Pump Control Module requirement   This QuickRun harness is designed to work with the 2015-2021 Car Hellcat 6.2L (USA) engines. These engines include 2015 -2021 Chargers, Challengers, and 300C models. That's right, it doesn't matter what vehicle you are putting it in, this harness is designed to power (standalone) the Hemi that came out of the vehicle(s) and years stated above. You will need the factory engine harness still on the engine. This QuickRun harness will plug into it. See THIS LINK for our video describing it more! Here at SUBLIME (formerly DIYHEMI) we have spent hundreds of hours in R&D and after doing quite a few hemi swaps into other vehicles ourselves, we've perfected this product for you. Our harness will plug and play into your existing factory engine harness and get you up and running quickly. Join our mission to Hemi Swap the World! Our DIYHEMI QuickRun Hemi Harnesses are designed to provide quality and value for our customer's hemi swap on older vehicle applications (see note below). Our harness will plug and play into your existing factory engine harness and ECM. We want you to quickly get on the road and enjoy that Hemi! Note : This harness is designed as a basic hemi engine swap harness for most older vehicles and hot rods with fewer electronics. This harness comes standard with AC command control for your factory Hemi AC compressor. It does not include provisions for factory gauges and other accessories (heat, cruise, ABS, etc.). Those items will need to be added on by the end user as desired.   R3 upgrades over the R2 version: Heavier gauge main supply cable (8AWG crosslink) Bolt in power distribution fuses Separated 10AWG power circuits for more independent component stability  ~ Now capable of higher amp draw electric fans and fuel pumps~   Contents: Plug and play full QuickRun Harness with plug and play connectivity for 2005-2022 Charger/Challenger dual electric fans (non-PWM)