2011 - 2014 Chrysler 300 3.6L V6 Supercharger Kit

* Due to high demand, please allow 2 weeks for your order to be assembled and shipped * Please note: These systems require professional installation with mechanical knowledge and support. Tune included, Vehicles should be DYNO Tested by a professional. 11-12psi of boost, gaining 175+HP!  2011 - 2014 Chrysler 300 3.6 V6 - RIPP Supercharger System.  400+ WHEEL horsepower right to the ground that can be driven daily.  Key features of this system are: a Vortech V3 Self-Contained Centrifugal Supercharger, an air-to-air front mounted intercooler, larger plug and play primary injectors and a proprietary plug-&-play map sensor. Proper ECU calibrations are provided by RIPP via HP Tuners. Our system bolts on in eight - ten hours by a licensed mechanic and is considered the most complete and easy to install system on the market. Preliminary tests show that an Automatic 3.6 Pentastar Chrysler 300 produces only 255** rear wheel HP (WHP) in stock form. With a RIPP Supercharger installed we safely squeezed 425WHP+ and 360ft/lbs** of Torque on a factory 3.6 Pentastar. That WHP is higher than a 5.7 V8 Engine swap costing thousands more and more in line with a 6.4 Hemi. Additionally clients have reported an MPG increase from 1-4mpg combined City/hwy***.  Key Features:  Vortech V3 Si Trim Supercharger (Self Contained) Vortech Mx flow Race Bypass Valve Plug and Play Injectors FIC MAP sensor Front Mounted Intercooler & hardware FMIC mounting system with cnc bumper spacer kit  Aluminum mandrel bent charge piping  Engine Management; HP Tuners, link cable and tune Supercharger Mounting Brackets + hardware Idler pulley assembly x2 Gates Belt Coolant crossover assembly + RTV Air Filter + intake piping Cast air intake hat + t-bolt clamp Hardware 4 Ply Black Boost Couplers Vacuum lines, Vacuum T's and all adapters required Fully Illustrated Color Instructions 1 Year Warranty Tech line with Customer Service Each kit is hand assembled here, in the USA. RIPP has spent an enormous amount of time testing for better drive quality. we've tested in all conditions including high altitude, hot dry deserts and cold wet climates. No other manufacturer has spent more time developing a bolt-on supercharger than RIPP and it is a brand people can rely on World Wide.  Heritage Edition Option: Looking for the traditional supercharger whine? Here it is. The Heritage Edition Vortech V-3 Supercharger makes the classic new again with it's V-1 Straight Cut Gear Set. This gear set is much louder than the helical cut gear set in the standard V-3 supercharger. Check out the video below to hear it! 2011 - 2014 Chrysler 300 model years are 50 state legal!  Please Review Important CARB Information Before Purchasing (click here) 100% Compatible with AWD Vehicles too!  *Horse Power Measured at the Rear wheel (not crank)  ** All RIPP WHP levels are measured at the rear wheel, not at the crank. Be careful when comparing HP to WHP. WHP levels vary depending on tire and gear combination as rotational mass comes into play, this affects both Naturally Aspirated (NA) and Forced Induction (FI) total output.  ***Although the tune included with this system is calibrated for your vehicle the user is responsible for any further Dyno tuning to refine the calibration to their liking. The tune should be considered standard. The user should look forward to proper Dyno tuning if necessary.  RIPP is not responsible for tuning or discrepancies between different dyno readings. Many Dynometers read in different net output depending on manufacture, style, elevation, and temperature. RIPP advertises SAE HP captured at the wheel instead of at the crank for the most realistic scenario as possible.  0-60 times and quarter mile times may vary based on driving style and other variable out of our control.     *Horse Power Measured at the Rear wheel (not crank)  ** All RIPP WHP levels are measured at the rear wheel, not at the crank. Be careful when comparing HP to WHP. WHP levels vary depending on tire and gear combination as rotational mass comes into play, this affects both Naturally Aspirated (NA) and Forced Induction (FI) total output.  ***Although the tune included with this system is calibrated for your vehicle the user is responsible for any further Dyno tuning to refine the calibration to their liking. The tune should be considered standard. The user should look forward to proper Dyno tuning if necessary.  *** RIPP is not responsible for tuning or discrepancies between different dyno readings. Many Dynometers read in different net output depending on manufacture, style, elevation, and temperature. RIPP advertises SAE HP captured at the wheel instead of at the crank for the most realistic scenario as possible.  0-60 times and quarter mile times may vary based on driving style and other variable out of our control.