200 × 50 Pneumatic Tire - Single

200 × 50 Pneumatic Tire - Single Replacement 200 × 50 pneumatic tire for compatible electric skateboards, mountainboards, scooters, carts, and other small electric-vehicle builds. This tire uses a street-oriented tread pattern designed to provide a smooth contact surface while still offering channels for grip and water displacement. It is intended for use with a compatible 200 × 50 inner tube and wheel rim. Sold individually so builders can replace one damaged or worn tire without purchasing a complete set. Key Features 200 × 50 pneumatic tire Street-style tread pattern Designed for compatible 8-inch wheel systems Suitable for electric skateboards and DIY electric-vehicle projects Replaceable tire for worn, damaged, or custom wheel setups Compatible with matching 200 × 50 inner tubes Sold as one tire Common Applications This tire may be used with compatible: Electric skateboards Mountainboards Drift carts Electric carts Scooters DIY modular EV projects Other wheel systems designed for 200 × 50 tires Compatibility depends on the rim dimensions, tire bead profile, inner tube, available clearance, and complete wheel assembly. Specifications Tire size: 200 × 50 Approximate diameter: 200mm Approximate width: 50mm Tire type: Pneumatic Tread style: Street Maximum inflation pressure: 36 PSI / 250 kPa Quantity: One tire Inner tube: Required and sold separately Rim: Not included Follow the pressure limit marked on the tire sidewall. The appropriate riding pressure may vary depending on rider weight, vehicle weight, rim, tube, and application. What’s Included One 200 × 50 pneumatic tire Inner tube, wheel rim, bearings, hubs, and mounting hardware are not included. Compatibility Before ordering, confirm that your wheel system is designed for a 200 × 50 tire. Check: Existing tire size Rim diameter and width Tire bead compatibility Inner-tube size Valve clearance Vehicle and enclosure clearance Manufacturer pressure limits Do not assume compatibility based only on the approximate outside diameter. Installation Notes Install with a compatible 200 × 50 inner tube and wheel rim. During installation: Inspect the rim for sharp edges, damage, or debris. Slightly inflate the tube before positioning it inside the tire. Make sure the tube is not pinched between the tire and rim. Seat the tire bead evenly. Inflate gradually while checking alignment. Do not exceed the pressure shown on the tire sidewall. Confirm the wheel rotates freely before riding. Recheck tire pressure regularly and inspect the tire for cuts, cracking, uneven wear, exposed material, or sidewall damage. Important Safety Information Do not use a tire that is damaged, improperly seated, excessively worn, or inflated beyond its rated pressure. Incorrect installation, incompatible components, underinflation, overinflation, or a pinched inner tube may cause sudden air loss or tire failure. Always verify the complete wheel assembly before riding.