2-CS009093: Horizontal Toggle Clamp 4000

Specs and Features: - Item No. 2-CS009093 - Without Adapter - Hole Pattern: 40mm - Length: 180mm (7.09") - Max. Holding Force: 4 kN - Weight: 2.20 lbs. (1kg) 1. Define the Height of the Square Cut the aluminum profile to the required length. Note the minimum height of the cut. Ensure cut edges are square. Deburr the profile after sawing. 2. Fasten the Base Plate Fasten aluminum profile using self tapping screws. When the screws are screwed in, a thread is created in the profile. Thread cutting is not required with self tapping screws. Maximum torque: 20 Nm 3. Insert Square Nuts Insert square nuts in the T-Slot of the aluminum profiles. For fastening customer-side templates (material thickness 5 – 6 mm) or optionally also lateral fastening of quick-change clamps with M8x12 screws. 4. Fasten the Cover Plate Fasten aluminum profile using self tapping screws. When the screws are screwed in, a thread is created in the profile. Thread cutting is not required with self tapping screws. Maximum torque: 20 Nm 5. Mount Accessories Mount the quick-change clamp directly on the cover plate. The quick-change clamp can also be attached using an adapter. 6. Clamp the Device Attachment to perforated plate, welding table or slot table with fast clamping bolts. If required, use a M8x12 screw to fasten the customized template to a square nut.