1Tenth - Aluminum Rear Link Riser for Axial Ryft

1Tenth Aluminum Ryft Rear Link Riser This is the same model as the nylon version but manufactured with Direct Metal Laser Sintering in Aluminum. It'll stand up to a bit more abuse than the nylon version. If you're looking for more options for dialing in your antisquat this is what you'll need. Installs onto the Axial rear axle where the links normally go and extends the double shear mount about 11 MM higher. Designed to work with our High Clearance Rear Brace but if you're handy it can work with the stock setup too. You just need more room on top of the links. You'll need 2 x M3x45MM and a couple M3 nuts to secure it to the axle or pick the options hardware kit