Jameson 16-14-600M Duct Hunter Rodder (1/4" x 600', Traceable. 5' Marks)

Highlights: 600 ft. of 1/4 in. Traceable fiberglass rod With copper trace wire Rod marked every 5 ft. with metric markings every 1 m Used For: Non-invasive locating and mapping of underground ducts and pipes Locating sewer laterals and confirm no cross bore has occurred Locating ductile iron, plastic, tile, and concrete pipe Use in conduit with a 1 - 2 in. inside diameter Detectable at depths up to 10 ft. when energized with a signal transmitter and traced with a hand-held receiver Features: 4 in. bend radius Supports full-line tracing using an electromagnetic signal Reduces time by helping eliminate digging and trenching Includes male end ferrule, pulling eye, and accessory kit attached to the frame The Jameson 16-14-600M Duct Hunter Rodder is designed for non-invasive locating and mapping of underground ducts and pipes in narrow conduit systems. It features 600 feet of 1/4-inch fiberglass rod with an integrated copper trace wire, allowing the user to locate sewer laterals, confirm no cross bore has occurred, and trace ductile iron, plastic, tile, and concrete pipe. Markings every 5 feet, along with metric markings every 1 meter, support accurate measurement and consistent tracking throughout each job. The rodder is built for conduit with a 1 to 2 inch inside diameter and can be detected at depths up to 10 feet when used with a signal transmitter and hand-held receiver. A 4-inch bend radius allows the rodder to navigate tight turns and confined pathways with improved control. The rodding reel supports full-line tracing using an electromagnetic signal, helping reduce time spent on digging and trenching. Included components such as the male end ferrule, pulling eye, and accessory kit attached to the frame provide added efficiency during setup and operation. With overall dimensions of 36.25 by 24 by 13 inches, this unit offers a compact profile suited for tighter working environments while maintaining extended reach and traceability. Its 600-foot length and 1/4-inch diameter make it idea for handling precise routing in conduit pathways. For applications that require flexibility and efficient underground locating in restricted spaces, The Jameson 16-14-600M Duct Hunter Rodder provides a superb solution. Specifications: Part Number: 16-14-600M Rod Length: 600 ft (182.88 m) Rod Diameter: 1/4-inch (6.35 mm) Rod Material: Fiberglass with copper trace wire Detection Distance: 10 ft (3.04 m) Bend Radius: 4″ (101.6 mm) Ideal for Conduit: With inside diameter between 1 - 2 inch (25.4 to 50.8 mm) Markings: Marked every 5 ft (1.52 m) and 1 m Included: Accessory Kit Dimensions: 36.25″ x 24″ x 13″ (921 x 610 x 330 mm) Included in these categories: Jameson Tools Jameson Tools Traceable Rodders Rodders Utility Tools