14" x 80" Sanding Belts, 4 PACK

14" x 80" Sanding Belts Our 14" x 80" sanding belt is ideal for applications such as when sanding aluminum, stainless steel or steel, composites, fiberglass, UHMD, Plastic etc.. We guarantee all three of our materials will perform to your standards because we only carry premium performing abrasive material. For a guide on which material to select for your 14" X 59" belt sander please refer to the questions below. We have them available in aluminum oxide (brown in color), zirconia (green or blue) as well as ceramic (bright red color) These belts can be used in both WET or DRY applications!  Common machines Reichmann, Montana, Grindrite, Wintersteiger that are common for the ski & snowboard fabrication / manufacturing market.   Common size for Wintersteiger machine.  What is the best material for sanding snowboards or skii's?  We have three materials to choose from when sanding snowboards or skii's for manufacturers or refurbishers.  Aluminum oxide - Best for economical applications. Good life but will not get you the best performance compared to zirconia and ceramic. This material is for those that don't want to break the bank and just want to get started. Aluminum oxide belts are brown in color and are made on a premium X-weight polyester backing that can be used in both WET and dry applications.  Zirconia - Great middle of the road option and traditionally is what most people order due to this cost effectiveness compared to longevity. Great grindability for skii's and snowboard stock removal. This will last about 3-4 times longer than aluminum oxide belts. Zirconia belts are green in color and are made on a stiff Y-weight polyester backing that can be ran in both WET and DRY applications.  Ceramic - Obviously the most expensive option but will last the absolute longest compared to zirconia and aluminum oxide. These belts will last about 2-3 times longer than zirconia and about 7-8 times longer than aluminum oxide belts when sanding both skii's and snowboards. Ceramic belts are red in color and are made on a Stiff X-weight, polyester backing that can be ran in WET and DRY applications.    WHAT SANDING BELT MATERIAL HELPS LOWER PRODUCTION COSTS?   Ceramic sanding belts are by far the best investment in a sanding belt you can make. Ceramic sanding belts last 2-3X longer than zirconia belts and about 10X longer than aluminum oxide belts! Ceramic sanding belts can withstand more heat, pressure & speed than any zirconia or aluminum oxide belt and will be far more cost effective on a part for part basis. Ceramic grains are intrinsically much denser and harder scientifically which translates to more money in your pocket!