14.4V LiFePO4 Battery Charger | 10A/20A, 100-240V AC Input

Key points Safely jump-starts BMS lithium batteries. Features M10 terminals and 50A Anderson connector. LED indicators for standby, charging, full, and error. Durable aluminum shell with cooling fan for heat dissipation. 3-stage charging: pre-charge, CC, CV. Protection: over-temperature, reverse polarity, short circuit, over-voltage. Description This LiFePO4 battery charger ensures 100% safe and reliable operation with comprehensive protection against over-temperature, reverse polarity, short circuits, over-current, and over-voltage, safeguarding both you and your battery. Equipped with LED indicators, it keeps you informed of the charging status, including standby, charging, full charge, and any abnormalities. Designed for top performance, it activates BMS-protected lithium batteries, helping extend their lifespan. Built for durability and reliability, it's your trusted lifetime LiFePO4 charging solution. How to Connect Connect the DC output cable to the battery, + to +, - to -, then connect the Anderson connector. Connect the AC input cable to the AC port and then to the grid power. Disconnect the Anderson connector or the grid power after charging is complete. Specifications Specifications 12V 10A Lithium Battery Charger Input Voltage: 100V to 240V AC; 50Hz to 60Hz Max Input Current: 5A Output Voltage: 14.4V DC Output Current: 10A Temperature Range: Operating: -20°C to 40°C/-4°F to 104°F Storage: -40°C to 70°C/-40°F to 158°F Dimensions: L7.09 x W3.58 x H2.03 in Net Weight: 0.94kg/2.07lb 12V 20A Lithium Battery Charger Input Voltage: 100V to 240V AC; 50Hz to 60Hz Max Input Current: 7A Output Voltage: 14.4V DC Output Current: 20A Temperature Range: Operating: -20°C to 40°C/-4°F to 104°F Storage: -40°C to 70°C/-40°F to 158°F Dimensions: L8.13xW3.56xH2.5 in Net Weight: 1.3kg/2.87lb Note： 1) This charger is only suitable for charging lithium batteries, and it is forbidden to charge lead acid batteries. 2) Please ensure your local mains power supply meets the charger's input voltage of the charger before use. 3) Make sure that the positive and negative poles of the charger DC output wires are correctly connected to the battery terminals: red → positive +, black →> negative -.