Used 12-volt Car Battery Adapter

These are 12-volt car battery adapters that have come in with various used equipment over the past year or so.  These could be Celestrons; or they could be generic.  You save!     The copy below is for the Celestron model; the generic would, of course, be similar.              Power your Celestron computerized telescope from your car battery or a portable 12V DC power supply. Barrel connector plugs into the 12V input jack on the telescope drive base. Power connector fits standard automobile cigarette lighter receptacles, also found on portable 12V battery packs like the Celestron PowerTank. 25-foot cord for lots of reach. The hobby of amateur astronomy frequently takes the observer away from sources of AC power. After all, we are always in pursuit of the darkest skies possible, and that often means going off the grid. The most common way to power your telescope in these situations is to use a portable 12V battery pack, like the Celestron PowerTank, or to use power from your car’s battery via the cigarette lighter. The Celestron Car Battery Adapter is the accessory required for connecting any Celestron computerized telescope to a DC power supply or car battery. Plug the round post into the 12V input jack on the drive base of your telescope, and insert the power connector into the cigarette lighter outlet in your car or on your power supply. The cord is 25 feet long, giving you plenty of reach between your telescope and 12V power source. The barrel connector can be used with any telescope that uses a receptacle with an outside diameter of 5.5 mm and an inner diameter of 2.1 mm and a “tip positive” polarity.   For use with the following Celestron telescopes: NexStar SLT Series/NexStar SE Series CPC/CPC Deluxe Series Advanced VX Series CGEM /CGEM II CGX/CGX-L Compatible with most iOptron mounts (including CEM25/40/60 & GEM45) except the CEM120.