EasyPSV Merlot / Permanent Adhesive Vinyl

Merlot Siser® Easy PSV Permanent Adhesive Vinyl Siser® PSV Pressure Sensitive vinyl, the new go-to adhesive vinyl for creating decals that can decorate almost any hard-surface. The name brand you know and trust is staying true to Siser® style by keeping things EASY.  Simply apply your designs to glass, wood, plastic and so much more when you use EasyPSV™! This sticky permanent vinyl adheres quickly so your creativity is never hindered, for signage graphics, stickers, and custom decoration of virtually any surface, including electronics, home appliances, and so much more! Additionally, EasyPSV’s ideal thickness makes it simple to cut, weed, and apply. Compatible with Cricut, Silhouette, brother, graphtec and any cutting machine on the market! Product Information: - 3 mils - 3-5 year durability - Gloss finish - 41 vibrant colors Permanent Adhesive This outdoor-rated EasyPSV™ comes equipped with a permanent adhesive that’s strong enough to survive weather & UV conditions. Add your custom monogram to a tumbler, mug, journal cover, or even your bicycle to show off your personal flair for years to come. ___________________________________________________________________________________________________________________ - Surface Prep Instructions - For best adhesion, remove any dirt, dust, grease, etc to prepare the surface you want to decorate with EasyPSV. The following cleaning method is not recommended for porous surfaces such as unfinished/untreated wood. It is recommended that all other surfaces be spot tested with care before cleaning the entire application area. Non-porous surfaces can be cleaned with a mix of approximately 2 parts water and 1 part isopropyl alcohol (70% or higher for best results) or non-ammonia based window cleaner. Use a microfiber or lint free towel to clean the application area with the mixture. Paper towel is not recommended since it will leave behind small bits of paper that can become trapped under the EasyPSV during application. Ensure the area is completely dry before applying. *The cleaning method outlined above is subject to modification and not always suitable for every substrate. The purchaser should independently determine with their own testing to use this method or not on a case by case basis. - Application Instructions - 1. Place EasyPSV with the liner side down and cut your design. (DO NOT reverse/mirror your design.) 2. Weed excess vinyl. 3. Remove the application tape's paper liner. Place tape on top of EasyPSV and burnish with a squeegee. 4. Lift the application tape and EasyPSV away from the paper liner to expose the permanent adhesive. 5. Place the application tape on your desired object and burnish with a squeegee to fully adhere the design. 6. Gently peel away the application tape, leaving just your EasyPSV design on the object. - Removal Instructions - If the EasyPSV peels up, but leaves an adhesive residue use an adhesive remover to clean the area. If the EasyPSV is stubbornly sticking, the heat from a hair dryer or garment steamer can help loosen the adhesive. However, heating is not recommended for glass due to possible shattering. To remove Permanent EasyPSV from glass, saturate the decal with soap and water. Cover with plastic wrap and let sit for a few hours before attempting to remove. An adhesive remover may still be required to clean all adhesive from the surface after removing the EasyPSV