1101 | ENDURANCE BEEHIVE VALVE SPRINGS TC Screamin Eagle Head

Feuling 1101 FEULING ENDURANCE BEEHIVE valve springs allow up to 650 lift camshafts no spring seat machining required. Machined from a premium grade Hi-tensile chrome silicon single conical ovate wire, shot-peened with a specially processed thermal heat treat and super NexTex finish to give these valve springs the needed fatigue life to exceed the high demands of V-Twin engines from stock to performance. Dont get stung by inferior valve springs! Quicker Revving - Smoother Motion - Light Weight Ti Retainers FEULING BEEHIVE valve spring kits are each hand measured and labeled specifically based on their coil bind / required open height. Our kits require you to measure installed height and may require use of included shims. This is so you can set up the springs specifically to your camshaft lift for quieter and smoother performance. Similar to tuning your suspension to your weight and riding style. FEULING BEEHIVE valve springs use a much smaller and lighter weight retainer which drastically reduces the valve weight creating a much quicker revving and smoother motion than comparable dual valve springs. FEULING Endurance springs allow up to 650 cam lift no machining or rocker box clearancing required. Eliminate valve spring separation, maximize stability, reduce valve-train noise & harmonics! Available for 5/16 and 7mm valves Kits include: FEULING ENDURACE BEEHIVE valve springs, lightweight 7 Degree Titanium heat treated retainers, machined spring seats, seat shims, valve locks and a set of premium Viton valve seals equipped with a spring loaded valve stem wiper system. SEAT Lbs. / INSTALLED HEIGHT 198 Lbs. @ 1.685 (0.535 Lift) 194 Lbs. @ 1.703 (0.553 Lift) 190 Lbs. @ 1.724 (0.574 Lift) 187 Lbs. @ 1.754 (0.604 Lift) 185 Lbs. @ 1.780 (0.630 Lift) 160 Lbs @ 1.800 (0.650 Lift) 375 Lbs @ 1.150 OPEN HEIGHT Coil Bind @ 1.100 FITS: TC Screamin Eagle Heads with 5/16 valve stems with std keeper grooves and .530 diameter valve guides, Springs, Ti Retainers, Seats, Seals, Keepers, seat shims COUNTRY OF ORIGIN: USA Disclaimer: Qualified Manufacturer Declared Replacement Part means any aftermarket part intended to replace an original equipment emissions related part and which is functionally identical to the original equipment part in all respects which in any way affect emissions (including durability), or a consolidated part, that has been evaluated and declared by the manufacturer to meet this definition and carry this categorization and designation label. This manufacturer has declared in writing that it has documentation, based upon sound engineering judgment, indicating the replacement part does not reduce the effectiveness of any required emission control device and it does not cause the modified vehicle/engine/equipment to exceed applicable emissions standards for that make/model/year fitment(s) advertised. FITMENT DISCLAIMER Fitment information is provided as a general reference only and is not guaranteed for any motorcycle, whether stock or modified. Compatibility may vary by year, model, and individual configuration. Customers are responsible for verifying fitment prior to purchase. House of Harley-Davidson assumes no liability for purchases made based on incorrect or unverified fitment information. Please contact our Parts Department with any questions before ordering at 414-282-2211