10' Tall x 5.0" OD x 0.125" Thick, Fluted Round Straight Aluminum, Decorative York Style Anchor Base Light Pole

Product Specifications Pole Shaft - Corrosion resistant 6063-T6 aluminum alloy in fluted aluminum tube. Pole Top - Available options include 2-3/8" or 3" x 4" pole top tenons. Custom drilling and top caps available upon request. Anchor Base - Structural cast aluminum one-piece 17" York style decorative base made of 356-T6 alloy. Includes ground provision. Handhole / Base Door - Includes door for anchor bolt and wire access. Anchor Bolts - Anchor bolts conform to AASHTO M314-90 Grade 55 and are provided with four hex nuts, four lock washers and four flat washers. Bolts have an "L" bend on one end and are galvanized a minimum of 10" on the threaded end per ASTM A153. Hardware - All structural fasteners are galvanized high strength carbon steel. All non-structural fasteners are stainless steel. Finish - Powder coat finish consisting of weather resistant triglycidyl isocyanurate (TGIC) polyester thermoset powders that are electrostatically applied, oven cured and bonded to a minimum dry film thickness of 2.0 mils. Design Criteria - All Effective Projected Area (EPA's) are calculated to 1994 AASHTO and are to be used with the 1994 AASHTO map provided. These EPA's cannot be used with newer maps. Please contact the manufacturer if newer AASHTO calculations or other local building codes are required.