10BASE-T1S USB Interface

Acts as a generic USB network interface card. PLCA and CSMA/CD support. The 10BASE-T1S USB Interface realizes a connection between a 10BASE-T1S network and a USB port.  The Single-Pair Ethernet 10BASE-T1S port supports both CSMA/CD and PLCA modes and allows for point-to-point and multi-drop network topologies. The port configuration, such as mode, BEACON transmission (PLCA coordinator), Node ID / Node count, and bus termination, can be easily set by on-board DIP switches. 10BASE-T1S test modes can also be generated. The 10BASE-T1S USB Interface is an ideal tool for connecting a 10BASE-T1S ECU or a multi-drop network to a computer or laptop without an internal network card, such as ultrabooks, mini-PCs etc. Features: 10BASE-T1S to USB network interface card 10BASE-T1S test modes generator USB – CAN(/FD) interface On-board switches for quick and easy configuration Specification: 10BASE-T1S port (IEEE 802.cg) Supports CSMA/CD and PLCA modes Supports PLCA coordinator and follower Point-to-point or multi-drop topology End-node termination can be easily enabled Test modes can be programmatically generated USB 2.0 network interface card USB Type-C connector USB-powered CAN(/FD) channel 5x status LED 11x switch for configuration Technical Specification: Feature Description Functions 10BASE-T1S USB network interface card 10BASE-T1S test mode generator Communication channels Automotive Ethernet:   10BASE-T1S (IEEE 802.3cg) CSMA/CD and PLCA modes supported Coordinator and Follower supported Node ID/Node Count and BEACON transmission configurable End-node termination can be switched on and off by on-board switch CAN bus: CAN-HS with ISO CAN FD support (ISO 11898-1:2015; CAN2.0A/B) USB 2.0: Generic 10 Mbit network interface card and USB VCP LEDs 4x Dual-colour LED 1x Power LED Buttons and switches 10x DIP switches 1x Switch (T1S termination) 1x Push button Power USB-powered over USB Type-C Connectors 10BASE-T1S: 4-pin removable terminal block CAN(/FD): 3 pin removable terminal block USB 2.0: USB Type-C Dimensions 88 x 82 x 33 mm Operating temperature -20 to 70 °C Placement Table (adhesive pads included) DIN-rail mount (bracket sold separately)