PM190 Water Methanol Injection Pump (50 GPH/3150CC Per Minute @ 150 psi)

Features Include: Pressure adjustable from 100-300 PSI 3/8 NPT female inlet & outlet port Motor turns 2200 RPM @ 12 volts   16.5 amperage draw Built-in bypass valve Built-in thermal protection Built-in anti reverse check valve  Built-in heat sink on back of motor Heavy duty dual EPDM pump seals    Pressure adjustable from 100-300 PSI Can run dry up to 1 hour without damage 100% methanol compatible  Tested prior to shipping  Made in the USA Weight 6.2 lbs Flow & Horsepower Ratings @ 13.5 Volts: 1.7 gallons per minute open flow 190 liters per hour @ 180 PSI 50 gallons per hour @ 180 PSI 3150 cubic centimeters @ 180 PSI Supports up to 2500-4500 horsepower - 100% water mix  Supports up to 1500-1900 horsepower - 50/50 water methanol mix Supports up to 1200-1600 horsepower - 100% methanol mix Special Notes: Do not use with petroleum products (E85, E98, gasoline, diesel, etc)  Use 12 gauge wire for power and ground Does not include pump fittings. Pump fittings are available for sale separately Pumps come preset at 220 PSI Expect 4-5 years of service if pump pressure is left at 220 PSI or below Running the pump over 250 PSI is not advised and will shorten pumps life All tests were performed using a 6AN stainless steel braided hose on the inlet side of pump Using 1/4" outside diameter nylon on the inlet side of the pump will reduce pump performance and flow output Pump may be mounted vertical or horizontal  DO NOT use with Snow or AEM progressive controller. Amperage on this pump is to high. Contents Include: Pump (1) Special Notes: Do not use with petroleum products (E85, E98, gasoline, diesel, etc)  Does not include pump fittings. Pump fittings are available for sale separately Pumps come preset at 220 PSI  Expect 4-5 years of service if pump pressure is left at 220 PSI or below Running the pump over 250 PSI is not advised and will shorten pumps life All tests were performed using a 6AN stainless steel braided hose on the inlet side of pump Using 1/4" outside diameter nylon on the inlet side of the pump will reduce pump performance and flow output Pump may be mounted vertical or horizontal  DO NOT use with Snow or AEM progressive controller. Amperage on this pump is to high. Instructions: Returns & Conditions: ProMeth is a company built on Customer Satisfaction and Service. Your complete satisfaction is our priority. If you are not completely satisfied with a product that you have purchased from ProMeth, you may return the new, unused part within 30 days from the purchase date for a refund, exchange or store credit. To Make A Return: Step 1. Call customer service at (801) 447-2559 to receive a RMA (Return Merchandise Authorization). RMA will be emailed to the customer. Step 2. Mail your item(s) along with your RMA, original receipt and contact info (Name, phone number, email, address, and reason for return) to the address below.              ProMeth, Inc.              538 Maulhardt Ave.              Oxnard, CA 93030 Step 3. Once we receive the item(s) we will contact you by phone and or email letting you know we not only received your returned goods but that they are in acceptable condition for return. At that time we will allow you to determine your choice of refund, exchange or store credit. Terms & Conditions For Returns Returns must be filed within 30 days of receiving product. Returns must be handled directly with ProMeth and not its dealers. You are the original purchaser and can provide proof of purchase.  The items were purchased new from ProMeth or authorized ProMeth dealer. All returns must be authorized before returning an item. Items are unused in original packaging.  No returns on used items. We are not responsible for loss or damaged goods being returned. Original shipping charges are non-refundable. Unauthorized returns are not accepted and will be returned to customer Warranty & Conditions: ProMeth is a company built on providing high quality water methanol injection products. All ProMeth water methanol injection systems/kits are warranted free from defects in materials and workmanship for a period of 3 years from the original date of purchase. All ProMeth water methanol injection parts/components sold individually are warranted free from defects in materials and workmanship for a period of 1 year from the original date of purchase. To File A Warranty Claim: If you believe you have received a defective part or experienced a part failure that should be covered under warranty, please follow the steps below. Step 1. Call customer service at (801) 447-2559 to discuss the problem, possible solutions and if warranty return deemed necessary obtain a Return Merchandise Authorization (RMA). Step 2. Mail your warrantied part(s) to the address below. Make sure to include the following. RMA# on the outside of the box Dated proof of purchase Name, phone number, email, address, reason for return. ProMeth, Inc. 538 Maulhardt Ave. Oxnard, CA 93030 Step 3. ProMeth will notify you by phone and or email letting you know that we have received your warrantied parts and that they were received in acceptable condition for return and warranty evaluation. Step 4. ProMeth will evaluate the product to determine if the failure resulted from a defect or from abuse, improper installation, misapplication or alteration. Step 5. ProMeth will at its sole discretion return, repair or replace the product while notifying the customer of its findings. If any ProMeth product is determined defective, buyer’s exclusive remedy is limited in value to the sale price of the good. Terms & Conditions For Warranty 3 year warranty on purchase of systems/kits. 1 year warranty on purchase of individual components/parts. You are the original purchaser and can provide dated proof of purchase. The items were purchased new from ProMeth or authorized ProMeth dealer. Warranty must be filed within 3 years from date of purchase for kits/systems and within 90 days for purchase of parts. Warranties must be handled directly with ProMeth and not its dealers. All warranties must be authorized and receive an RMA# before returning an item. RMA# must be displayed on the outside of the package containing the returned part. Unauthorized returns or packages that do not have an RMA# displayed on the outside of the package are not accepted and will be returned to customer. We are not responsible for loss or damaged goods being returned. All returns must be shipped freight pre-paid by the customer In no event shall ProMeth be liable for incidental or consequential damages