1/3 Scale Super Cub

Now Laser Cut   Type                                                    1/3 scale 2-place civil aircraft Wing Span                                          140-3/4 inches  (11-3/4 feet) Wing Cord                                          21 inches Wing Area                                          3051 Sq. inches Airfoil                                                 Flat Bottom Wing Loading                                     22 ~ 26 Oz / Sq. Foot. Tail Span                                             38 inches Flying Weight                                     30 ~ 35 Lbs Fuselage length                                   88-3/4 inches Fuselage Width                                   9 Inches (in cabin area) Height                                                 27 inches (flight ready) Engine Size                                         2.7 cubic inch (45cc)  to  4.27 cubic inch (70cc) Radio Gear                                          5-Channel W/ 7 Servos min. (150 Oz Torque min.) Cowl width at the front                       10” wide X 10" high (at firewall) X 10-1/2 deep Wing Dihedral                                    3/4 inch on each side 1/3 Scale Cub Wheels                        6 Inch   Model Features Balsa, Bass, Plywood, and Aluminum Construction. Separate “plug in” wing panels. Functional Flaps   Kit includes Rolled Full Size Plans & Photo Instructions. Complete Hardware package (including all push rods and cables). Complete interior kit (includes seats and instrument panel) Robart Scale Landing Gear W/ Scale "Cub" Wheels Scale leaf spring tail wheel assembly W/wheel Scale “pull, pull” rudder control system W/ bell crank and cables Scale “Baer Cub” decals Scale fiberglass cowl Scale 3-View Drawings.   Items Needed to Complete Covering material (2, 10-meter rolls Solartex recommended) Paint, Radio, Engine   Notes: Center of Gravity:  5-3/4 inches back from Leading Edge of Wing         Control Throws: Rudder  …………….  2 ~ 2-1/2” Left & Right Elevator  ……………  1-1/2” Up & Down Ailerons  ……………  1” Up & Down (Differential 1” Up & 3/4” Down) Flaps  ……………….  1” Down     Note Plywood for firewall is metric when laminated comes out between 1/4 and 3/8 inch this is fine!   Rust-oleum 2X “Golden Sunset” is a good match to Oratex “Cub Yellow”.