1/10 Scale Single Blade Fully Functional Plow

This is a 3D designed and printed plow for a 1/10 RC truck, truck and lights are not included.  Lights are available for separate purchase in the store.  It is a fully functional plow with right, left and straight directions.  It mounts with the use of a truck specific adapter or a winch adapter sold separately.  I have confirmed that it will work on the RC4WD TF2 (Mojave, 1982 Toyota, Marlin), Traxxas TRX4 (including high trail), Axial SCX10 III or SCX10 II, CEN Racing dl Series (F-450 or Sicario) and Element Enduro.  If you have a truck not listed, let me know and I can most likely adapt to it.  Servos can be included in the purchase (optional) and will be installed and electronically centered if selected.  This will not work with a stock radio system.  Both sides of the plow have a servo and will need an additional channel in your radio system to work.  A third channel will be necessary if you are using your radio to control the winch. Things you need to make it fully operational: Plow adapter for your specific model (included but you need to select which truck in options).    A winch.   A winch hook that latches.  A radio system with enough channels to support what your truck needs plus 2 or 3 extra.  Two extra if you use a key fob style controller for your winch.  Three extra if you want to control the winch from your Transmitter.   2 Low profile servos, unless you choose the option for them.   Servo wire extenders depending on your model. Lights, if wanted.  I now have the option to buy light on my site. If you need help finding any of the items above, message me and I can send you the link to what I used. Extra scrapers are available in the store if they wear down or break. As always, If you don't see what you want, just ask.  I'm sure we can figure something out.  I have a limited stock so if I need to print your order, it may be 1-3 days for me to mail out your order.  Right now shipping is set at $10. All components are 3D printed and adaptable to stock trucks.  If you have any huge mods to bumpers or suspension, please ask first before ordering.  I designed and tested the plow through multiple designs and learned a lot.  This is the most sturdy design I have made to date and minor changes may be made from the photo as the design continues to get better.  If your plow breaks for any reason, please send me a picture.  I may redesign it and/or send you a replacement part.  If it broke and you need spare parts, let me know.  If you get it and it does not work for any reason, just let me know and we can adapt it.   This is a 3D designed and printed plow for a 1/10 RC truck, truck and lights are not included.  It is a fully functional plow right, left and straight directions.  It mounts with the use of a two post bumper or a winch adapter sold separately.  I have confirmed that it will work on the RC4WD TF2 (Mojave, 1982 Toyota, Marlin), Traxxas TRX4 (including High Trail, select that in options), Axial SCX10 III (you can adapt a SCX10 II, just let me know), CEN Racing dl Series (F-450 and Sicario) and Element Enduro.  If you have a truck not listed, let me know and I can most likely adapt to it.  A servo can be included in the purchase (optional) and will be installed and electronically centered if selected.  This will most likely not work with a stock radio system.  The plow has a servo and will need an additional channel in your radio system to work.  A second channel will be necessary if you are using your radio to control the winch. Things you need to make it fully operational: A winch.   A winch hook that latches.  A radio system with enough channels to support what your truck needs plus 1 or 2 extra channels.  One extra if you use a key fob style controller for your winch.  Two extra if you want to control the winch from your Transmitter.   1 Low profile servo, unless you choose the option for them.   Servo wire extenders depending on your model. Lights, if wanted.  I will include the hardware to install the side markers and spotlights I used in every purchase.  Lights are available in the store for purchase as an add-on. If you need help finding any of the items above, message me and I can send you the link to what I used. Extra scrapers are available in the store if they wear down or break. As always, If you don't see what you want, just ask.  I'm sure we can figure something out.   I have a limited stock so if I need to print your order, it may be 1-3 days for me to mail out your order.  Right now shipping is set at $10. All components are 3D printed and adaptable to stock trucks.  If you have any huge mods to bumpers or suspension, please ask first before ordering.  I designed and tested the plow through multiple designs and learned a lot.  This is the most sturdy design I have made to date and minor changes may be made from the photo as the design continues to get better.  If your plow breaks for any reason, please send me a picture.  I may redesign it and/or send you a replacement part.  If it broke and you need spare parts, let me know.  This was tested on the Marlin and Mojave II models but should fit all RC4WD TF2 models.  If you get it and it does not, just let me know and we can adapt it.