1-1/4” HAP HANGER

Model PL-1111-7 Fits: 1-1/4" PVC PIPES Fits: 1-1/2" COPPER PIPES HAP Hangers are made from automotive-grade, powder-coated spring steel and are designed for use with any pipe or stud material. They work seamlessly with inside-wall applications, combining a hanger and stud guard in one. With a single snap and securement using just two screws, installation takes about seven seconds—holding and protecting pipes with unmatched efficiency.  The HAP Hanger can also be turned and applied as a surface-mounted solution. Simply install it, then snap the pipe in. All medium, regular HAP Hangers from 1-1/4" to 2" are concentric. Inside of the wall: Measure 1-3/4" from the front of the stud and drill with a 2-3/4" bit to create a slightly larger hole for a smoother transition. Since all medium sizes are concentric, you can easily increase from 1-1/4" to 2" without offset Outside of the wall: Place the HAP Hanger on the wall, secure it with two screws, and snap the pipe in. Since all medium sizes are concentric, you can easily increase from 1-1/4" to 2" without any offset Quick installation: Each HAP Hanger can be installed in about 7 seconds for inside-wall applications and about 10 seconds for outside-wall applications. Powder coating: Prevents galvanic corrosion and allows HAP Hangers to be used with any pipe material Meets existing construction codes: cUPC listed and SGS certified for voltage above 480V Safety: Rounded edges for safe installation with no sharp surfaces How to install: HAPSYSTEM.COM/HOWTO HANG WITH US™