06-08 For/Imp SpeedyEFI Plug and Play ECU

PLEASE DOUBLE CHECK THE MODEL LIST BELOW!!!   Here we have our 06-08 SpeedyEFI Plug and Play ECU kit! Housed in the stock ECU case is a SpeedyEFI Fishdog ECU, mounted to our custom circuit board, featuring the stock ECU header. We've included screw terminals for the O2 controller and launch control connections, spare inputs, and more! Any pin not being used is available as a breakout on the board. Factory A/C functionality is achievable via an external relay, and all kits come pre-wired for boost control and flex fuel. Additionally, this setup is good for both H4 and H6 applications; one jumper needs moved, that's it!   As a legal disclaimer, this product is intended for off-road/race use only. We do not provide any form of tuning aside from a base map. A base map is solely intended to allow you to start the car. This will need tuned via TunerStudio. Please note, this ECU will eliminate the OBD2 system, which means your vehicle will not pass emissions in states/counties that require testing. Use at your own risk!   For more info on the SpeedyEFI standalone, please check out the product description on their website: https://speedyefi.com/product/fishdog-ua4c-seawolf-speeduino-ecu/   For generic install instructions, please check out our install videos on YouTube: https://youtu.be/PgBZEepLl2I   SpeedyEFI/Speeduino/ReetWire does not currently support DBW. If this is being used on a stock engine, a cable throttle pedal, DBC throttle body, and throttle body adapter plate must be installed. Pedal adapter plates are readily available online, making it an easy swap. Be sure to grab one of our throttle body patch harnesses (coming soon)!   This ECU is good for the following USDM models only: 2006-2008 Forester 2006-2007 Impreza   If your vehicle is not in the list, this ECU will not work in your vehicle. The H6 option is higher priced as it will also require an engine harness adapter. If swapping a different H4 into your vehicle, select the H6 option, and email us with info on which engine you're using so we can build the appropriate engine harness adapter. This ECU works for non VVT/VVL engines only. Current build time is 2-3 months. As we continue to work towards building our inventory, build times will steadily get shorter. If you have any questions, feel free to reach out!   P.S.-Better photos will be uploaded soon!