PanaVise Electronic Work Center with Base, Circuit Board Holder, Parts Tray, and Soldering Iron / Solder Spool Holder (324)

This practical, pre-assembled combination includes: Standard base (300) - rearrange work items into virtually any position (tilts 90°, turns 360°, and rotates 360°) with a single control knob and exclusive split-ball to lock head firmly in place Circuit Board Holder (315) - holds circuit boards up to 12-inches (304.8mm) wide and up to 0.156-inch (4mm) thick Parts Tray Base Mount (312) - six integral part holding wells with rounded and sloped walls for easy parts retrieval Soldering Attachment (371) - soldering iron holder, controlled-feed solder/wire holder (for standard-sized spools), and two nib sponges with self-purging slits This complete package creates an economical work station with everything right at your fingertips! Measures 13.5" (342.9mm) tall and weighs 4.5 lbs. (2kg). PanaVise 300 Versatile Base: The PanaVise 300 standard base is 3-3/4" (95.2 mm) tall, weighs 1.4 lb. (0.6 kg) and has a base diameter of 4-5/16" (109.5 mm). The base combines with one or more of PanaVise's compatible heads (sold separately) to create a work-holding tool suitable for most any hobbies, electronic repair or assembly, or small home repairs. The bolt circle at the bottom of the base contains three pre-drilled holes that are countersunk for use with 1/4" (6.3 mm) flat head screws (sold separately) to secure the base to a work surface. Alternatively, the 1.4 lb. (0.6 kg) weight of the 300 standard base makes it suitable for lighter work-holding tool applications where mounting of the base is not required or desired. Key Features Versatile general purpose work-holding tool base suitable for small-to-medium-sized projects such as arts and crafts, model making, electronics, jewelry making, and home repairs "Split-ball" feature controls for head movement through three separate planes Single load control knob locks head firmly in place Circuit Board holder can be removed for use with any 300 series vise heads, or any tool with a 5/8" diameter shaft (sold separately) Can be mounted to work bench or base mount with countersunk bolt circle Specifications: Height: 3-3/4" (95.2 mm) Weight: 1.4 lb. (0.6 kg) Diameter: 4-5/16" (109.5 mm) 3-plane adjustability Rotation: 360 degrees Turn: 360 degrees Tilt: 90 degrees Shaft diameter accepted: 5/8" (15.9 mm) Bolt circle countersunk for three 1/4" flathead screws PanaVise 315 Circuit Board Holder Arms & Cross Bar: The PanaVise Circuit Board Holder Head helps you work quicker and smarter! The top of the line holder for working with circuit boards, this head can hold circuit boards up to 12" (304.8mm) wide and up to 0.156 (4mm) thick. The arms move independently and feature V shaped grooves. The Notches positioned at the arm tips conveniently hold smaller parts for easy wiring and soldering. A ratcheted pivot point holds boards horizontally, vertically or any angle in between. Key Features Circuit Board Holder Arms & Cross Bar - The arms are designed to be used with circuit boards up to 4 mm thick. The cross bar can be adjusted or replaced (replacement bars of different lengths and replacement arms sold separately). Cross Bar Knobs allow easy release for simple adjustments. Quick Release & "V" Notch - The Quick Release Spring Tension Lever allows for easy placement and removal of boards. The "V" Notch at the top of both arms allows you to easily work with electrical components for wiring or soldering. Pivot Point - The shaft has a pivot point allowing for 196 degrees of tilt. Specifications: Overall height: 10-7/8" (274.7) Tilt: 196 degrees Vise opening: 12" (304.8 mm) Vise closing: 1/8" (3.18 mm) Jaw width: 1-3/8" (34.99 mm) Jaw height: 6-13/16" (172.72 mm) Head length: 14" (355.6 mm) Shaft diameter: 5/8" (15.9 mm) Cross bar length: 14" (355.6 mm) Max circuit board thickness: 4 mm Weight: 1.28 lbs (.58 kg) PanaVise 312 - Parts Tray Base Mount: The PanaVise Tray Base Mount, allows you to neatly organize your small parts and tools. The cast aluminum base mount adds stability and has six integral parts wells with rounded and sloped walls for easy parts retrieval. It includes 6 non-marring, anti-skid pads and has three 1/4-20 holes drilled and tapped on the outer lip for mounting accessories. Key Features 6 parts wells - Organizes your small parts in the 6 parts wells. The rounded and sloped walls makes it easy to retrieve parts. Stability - This cast aluminum Base Mount adds stability. 6 non-marring, anti-skid pads prevent scratching on the work surface. Over all diameter of 8-7/16" (225.4 mm). Accessories - Three pre-drilled and tapped 1/4"-20 holes to secure. Specifications: Overall height: 1/2" (12.83 mm) Weight: 1.88 lbs (.85 kg) Color: Silver Diameter: 8-7/16" (225.4 mm) Material: Zinc Bolt Circle Diameter: 4-3/8" (109.54 mm) PanaVise 371 Solder Station: Solder station is a complete soldering kit (soldering iron and solder not included) consisting of a wire soldering iron holder, a controlled-feed solder/wire holder (for standard-sized spools), two nib sponges with self-purging slits, and two mounting screws and nuts. Key Features Allows the user to safely and conveniently house a soldering iron and solder The two nib sponges are shaped to fit into any two of the six part wells and can be wetted for convenient wiping away of burnt flux and other material that builds up on soldering iron tips The kit may also be detached for use as a freestanding unit, easily attaching to a bench or wall, with the nib sponges placed in a shallow container