011377 InformaCast® Enabled RGB (Multi-Color) Strobe

Description The wall-mounted InformaCast Enabled RGB (Multi-Color) Strobe operates as a visual alerting device. In InformaCast mode, when receiving an audio page, the Strobe will be activated, displaying the specific color, brightness and blink rate configured by the user. The Strobe supports 10 InformaCast priority levels*. In the SIP mode, the device can be set up as part of a ring group or call group with the Strobe engaged as notification of incoming calls or pages. You can have the Strobe respond to message waiting signals by blinking. When the message has been heard, the Strobe stops blinking. The InformaCast Enabled Strobe may also be activated by being part of a multicast group. The Strobe can be configured with up to 10 multicast addresses and is activated when a stream is sent to its address. Users may also use CyberData's HTTP command set to directly access the Strobe's functions. *InformaCast v9.0.1 or higher is required to take advantage of this feature. Features Compatible with Singlewire InformaCast v12.1, including support for downloading SIP credentials from InformaCast Compatible with Cisco Call Manager Meets ADA requirements for telephony signaling and notification Multiple colors, blink rate and brightness can be selected for each of the different activation methods SIP and multicast activation Cisco SRST support Event-controlled relay Tamper sensor TLS 1.2 and SRTP enhanced security for IP Endpoints in a local or cloud-based environment Web-based setup   Indoor Use Areas Include: Sales and Support mailbox indication Classrooms, offices or courtrooms Banks and financial institutions Court Rooms Manufacturing Warehouses Specs Ethernet I/F 10/100 Mbps Protocol SIP RFC 3261 Compatible Notification Software InformaCast v4.0 and above Power Input PoE 802.3af compliant or +8 to +12VDC @ 1000mA Regulated Power Supply (not included) Flash Rate 5 user-defined scenes LED MTBF 100,000 Hours On-Board Relay 1A at 30 VDC Network Security TLS/SSL 1.2 Operating Range Temperature: -40 degrees C to 55 degrees C (-40 degrees F to 131 degrees F) Humidity: 5-95%, non-condensing Storage Temperature -40 degrees C to 70 degrees C (-40 degrees F to 158 degrees F) Storage Altitude Up to 15,000 ft. (4573 m) Dimensions* Length: 4.5 inches [115 mm] Width: 2.1 inches [55 mm] Height: 4.5 inches [115 mm] Weight Boxed Weight 1.0 lbs. [0.45 kg] 2.0 lbs. [0.90 kg] Compliance CE; EMC Directive Class A EN 55032 & EN 55024, LV Safety Directive- EN 60950-1, RoHS Compliant, FCC; Part 15 Class A, Industry Canada; ICES-3 Class A, IEEE 802.3 Compliant Warranty 2 years limited Part Number 011377 *Dimensions are measured from the perspective of the product being upright with the front of the product facing you. FAQs I have a Cisco 6513 switch. When I plug in a CyberData VoIP device, the device constantly reboots and will not register to the SIP server. Please adjust the switch power selection to Power inline static, as opposed to Power inline dynamic. This will allow the device to continuously receive 15.4W of power. I need to install a CyberData Strobe outdoors. Is there a dome enclosure that can be used with your strobes and if so, what is the part#? We recommend the dome enclosure made by Safety Technology International <https://www.sti-usa.com> PN: STI-1229-HAZ I have a Cisco Catalyst series switch. How do I set the unit so that it can use PoE (under 15.4w) instead of an external power source? There are known PoE limitations with third party devices on the Cisco Catalyst series switches. This includes the 2500, 3500, and 6500 series switches. It's important to keep in mind that CyberData devices are considered third party devices and require switch port setting adjustments. Be sure to turn power policing off if it has been enabled on your switch. Power policing is disabled by default. Also, configure your port for no shutdown. Use the following command to configure inline power: power inline static max 15400. What IP phones do you recommend for setting up a Peer to Peer with this device? See SIP Point-To-Point Configuration Installation Typical Installation Mounting Downloads Serial Number begins with 3771xxxxx Documentation Description Date PDF Datasheet DATE:7/23/19 PDF Quick Start Guide DATE:3/28/17 PDF Quick-Reference Placemat DATE:3/28/17 PDF Operations Guide (firmware version 11.7.3) DATE:12/13/17 PDF Operations Guide (firmware version 11.6.0) DATE:1/11/17 PDF Using a CyberData Informacast Enabled RGB Strobe DATE:9/3/19 PDF CE Declaration of Conformity DATE:5/15/17 Firmware, Drivers & Utilities ZIP Firmware 11.8.0, autoprovisioning template, and release notes. Please note that a firmware upgrade could change your configuration. Therefore, please be sure to back up your configuration before upgrading your firmware. DATE: 6/20/17 ZIP The SolarWinds TFTP server is used when autoprovisioning firmware updates or audio files. ZIP The Discovery Utility scans the network and reports back any found VoIP devices that are attached to the physical network. Serial Number begins with 3772xxxxx Documentation Description Date PDF Datasheet DATE:7/23/19 PDF Quick Start Guide DATE:3/15/19 PDF Quick-Reference Placemat DATE:3/15/19 PDF Operations Guide (firmware version 21.0.0) DATE:1/20/23 PDF Operations Guide (firmware version 20.0.0) DATE:3/15/19 PDF Using a CyberData Informacast Enabled RGB Strobe DATE:9/3/19 PDF CE Declaration of Conformity DATE:2/23/17 Connecting to Compatible IP-PBX Servers Firmware, Drivers & Utilities ZIP Firmware 21.1.1 DATE:2/28/23 ZIP Firmware 21.0.0 DATE:1/20/23 ZIP Firmware 20.0.0 DATE:3/13/19 ZIP The SolarWinds TFTP server is used when autoprovisioning firmware updates or audio files. ZIP The Discovery Utility scans the network and reports back any found VoIP devices that are attached to the physical network.