011376 SIP RGB (Multi-Color) Strobe

Description The wall-mounted SIP RGB (Multi-Color) Strobe operates as a visual alerting device. The device can be set up as part of a ring group or page group with the Strobe engaged as notification of incoming calls or pages. The SIP RGB (Multi-Color) Strobe may also be activated by being part of a Multicast group. When audio is detected on a specific Multicast address and port, the strobe will activate.  Users can program or listen to up to 10 Multicast addresses.  Through a web page setup, you can have the strobe respond to message waiting signals by blinking. When the message has been heard, the strobe stops blinking. Multiple colors, blink rate, and brightness can be selected for each of the different activation methods. Users may also utilize CyberData's HTTP command set to directly access the strobe's functions. CyberData's SIP-enabled VoIP products are compatible with a vast majority of VoIP systems including SBCs, Gateways, and phone systems both on-premise or cloud-based.  Features Meets ADA requirements for telephony signaling and notification SIP and Multicast activation Night Ringer function - second SIP extension that can be configured with its own strobe scene Door closure and tamper alert signals   TLS 1.2 (including mutual authentication) and SRTP enhanced security for IP Endpoints in a local or cloud-based environment Autoprovisioning via HTTP, HTTPS, or TFTP HTTPS or HTTP web-based configuration. HTTPS is enabled by default. Configurable event generation for device health and status 802.11q VLAN tagging HTTP command interface Support for Cisco SRST resiliency   Indoor Use Areas Include: Sales and support mailbox indication Classrooms, courtrooms, and offices Banks or financial institutions Manufacturing warehouses Specs Ethernet I/F 10/100 Mbps Protocol SIP RFC 3261 Compatible Power Input PoE 802.3af compliant or +8 to +12VDC @ 1000mA Regulated Power Supply (not included) Flash Rate 5 user-defined scenes LED MTBF 100,000 Hours On-Board Relay 1A @ 30 VDC Payload Types G.711 a-law, G.711μ-law, G.722 and G.729 Network Security TLS 1.2, SRTP, HTTPS Operating Range Temperature: -40 degrees C to 55 degrees C (-40 degrees F to 131 degrees F) Humidity: 5-95%, non-condensing Storage Temperature -40 degrees C to 70 degrees C (-40 degrees F to 158 degrees F) Storage Altitude Up to 15,000 ft. (4573 m) Dimensions* Length: 4.5 inches [115 mm] Width: 2.1 inches [55 mm] Height: 4.5 inches [115 mm] Weight Boxed Weight 1.0 lbs. [0.45 kg] 2.0 lbs. [0.90 kg] Compliance CE: EMC Directive – Class A EN 55032 & EN 55024, LV Safety Directive EN 62368-1; RoHS Compliant; FCC Part 15 Class A; Industry Canada ICES-3 Class A; IEEE 802.3 Compliant; TAA Compliant Warranty 2 years Limited Part Number 011376 *Dimensions are measured from the perspective of the product being upright with the front of the product facing you. FAQs How do I update my firmware? Go to the Downloads tab, click on the serial number range matching your device and download the firmware compatible with it. To update the firmware, unzip the file and log in to the web GUI for the device you are trying to upgrade. Navigate to the Firmware tab and browse for the firmware file you just downloaded. Select and upload that file. Do not reboot, the device will do it for you. For more information, please check your product’s Operations Guide, also available under the Downloads tab. PLEASE NOTE: Firmware is not backward compatible for V3 devices. If you are downgrading or trying to update a pre-V3 device, please contact CyberData’s Technical Support Department first to ensure the device does not get damaged. We also recommend you export a copy of your current configuration BEFORE updating, should a loss of power or another issue occur that would potentially lose your settings. Is this device compatible with my service provider or IP-PBX server? CyberData VoIP products are compatible with IP-PBX servers that support standard SIP protocol. You can find a full list of IP-PBX servers that CyberData products have been validated on by going to Connecting to Compatible IP-PBX Servers. If you do not see your IP-PBX on this list, feel free to contact CyberData’s Technical Support Department for more information. What is multicast? IP multicast is a technique for one-to-many communication over a local IP network. IGMP multicast is sent via UDP packets from a multicast server to a multicast receiver. This stream scales to a larger receiver population by not requiring prior knowledge of who or how many receivers there are. Multicast uses network infrastructure efficiently by requiring the source to send a packet only once, even if it needs to be delivered to many receivers. The network replicates the packet in order to reach multiple receivers only when necessary. Multicast is a great alternative to SIP registration as it does not require that the recipient of the stream must register as an extension on an IP-PBX server. CyberData products support both regular IGMP multicast as well as proprietary Polycom Group Paging. How can I prevent water or weather damage to the device if it is in a vulnerable location? This device is for indoor use only. We recommend the IP66 rated 011479 SIP Outdoor RGB (Multi-Color) Strobefor outdoor locations. For additional support or answers to questions not covered on this page, who should I contact? CyberData’s Technical Support Department Installation Typical Installation Mounting Downloads Serial Number begins with 3761xxxxx Documentation Description Date PDF Datasheet DATE:1/21/22 PDF Quick Start Guide DATE:3/8/17 PDF Quick-Reference Placemat DATE:3/8/17 PDF Operations Guide (firmware version 11.7.3) DATE:10/18/17 PDF Operations Guide (firmware version 11.6.0) DATE:1/11/17 PDF CyberData Night Ringer Explained DATE:3/25/20 PDF CE Declaration of Conformity DATE:5/15/17 Firmware, Drivers & Utilities ZIP Firmware 11.8.0, autoprovisioning template, and release notes. Please note that a firmware upgrade could change your configuration. Therefore, please be sure to back up your configuration before upgrading your firmware. DATE:6/20/17 ZIP Firmware 11.7.3, autoprovisioning template, and release notes. Because this release features many enhancements, it is advisable to restore factory defaults after completing the upgrade. Therefore, please back up your configuration before upgrading this firmware DATE:3/8/17 ZIP Firmware 11.6.0, autoprovisioning template, and release notes. Please note that a firmware upgrade could change your configuration. Therefore, please be sure to back up your configuration before upgrading your firmware. DATE:10/06/16 ZIP The SolarWinds TFTP server is used when autoprovisioning firmware updates or audio files. ZIP The Discovery Utility scans the network and reports back any found VoIP devices that are attached to the physical network. Serial Number begins with 3762xxxxx Documentation Description Date PDF Datasheet DATE:1/21/22 PDF Quick Start Guide DATE:3/8/19 PDF Quick-Reference Placemat DATE:2/1/19 PDF Operations Guide (firmware version 20.2.0) DATE:1/17/22 PDF Operations Guide (firmware version 20.0.0) DATE:3/8/19 PDF CyberData Night Ringer Explained DATE:3/25/20 PDF CE Declaration of Conformity DATE:2/23/17 Connecting to Compatible IP-PBX Servers Firmware, Drivers & Utilities ZIP Firmware 20.2.0, autoprovisioning template, and release notes. DATE:1/11/22 ZIP Firmware 20.0.0, autoprovisioning template, and release notes. DATE:1/30/19 ZIP The SolarWinds TFTP server is used when autoprovisioning firmware updates or audio files. ZIP The Discovery Utility scans the network and reports back any found VoIP devices that are attached to the physical network.