011187 2-Port PoE Gigabit Switch

Description The CyberData 2-Port PoE Gigabit Switch is designed to expand a single PoE network connection into one or two PoE network ports. Pass through PoE Power The CyberData 2-Port PoE Gigabit Switch is powered from a single 802.3at or 802.3af network switch and or power source and passes that power through to one or both of the switch ports In the basic configuration, one of the Gigabit ports can drive a VoIP phone directly with PoE and the other Gigabit port can be connected to a user’s PC. No external power supplies are required. Features Power Fully compliant to IEEE 802.3af/at standard 1 Power Device (PD) input port 802.3af or 802.3at 2 Power Source Equipment (PSE) output ports 802.3af or 802.3at (dependent on PD input)   Data All ports are 10/100/1000Mbps (10BASE-T,100BASE-TX,1000BASE-T) auto sensing based upon the port's individual connection Each port has auto MDI-X 802.11q VLAN tagging Automatic address learning, address aging and address migration Supports 9216-byte jumbo frame length   Notification Link/Status and connection speed LEDs Specs Ethernet I/F 10/100/1000 Mbps, Auto MDI-X, RJ45 Power Distribution Input PD input up to 30W: 802.3af @ 15W 802.3at @ 25W Generic PoE Injector up to 30W Internal Circuit Use 2W Output* Power available to share between two PSE outputs: 13W with 802.3af input 23W with 802.3at input 28W with generic 30W PoE injector input Operating Range Temperature: -40 degrees C to 55 degrees C (-40 degrees F to 131 degrees F) Humidity: 5-95%, non-condensing Storage Temperature -40 degrees C to 70 degrees C (-40 degrees F to 158 degrees F) Storage Altitude Up to 15,000 ft. (4573 m) Dimensions** Length: 5.31 inches [134.8 mm] Width: 3.03 inches [76.9 mm] Height: 1.06 inches [26.9 mm] Weight Boxed Weight 0.56 lbs. [0.25 kg] 1.0 lbs. [.54 kg] Compliance CE: EMC Directive - Class A EN 55032, EN 55035 & EN 61000, LV Safety Directive- EN 62368-1; RoHS Compliant; FCC Part 15 Class A; IEEE 802.3 Compliant Warranty 2 years limited Part Number 011187 *Either one or both of the PSE outputs can provide PoE power as long as the overall PSE output wattage is 2W less than the PD input. **Dimensions are measured from the perspective of the product being upright with the front of the product facing you. Installation Network Connection The Standard RJ-45 Introduction The Standard Cable, RJ-45 Pin Assignment Downloads Documentation Description Date PDF Datasheet DATE:5/14/21 PDF Quick-Reference Placemat DATE:1/10/22