011146 SIP Paging Server with Bell Scheduler

Description The SIP Paging Server with Bell Scheduler enables users, through a single SIP extension, to access up to 100 zones for paging and bell scheduling for VoIP phone systems. The SIP Paging Server has a built-in calendar-based bell scheduler that enables, through a secure web interface, scheduled bells and prerecorded messages to be sent to different multicast zones as well as to legacy analog paging systems. CyberData's SIP enabled VoIP products are compatible with a vast majority of VoIP systems including SBCs, Gateways, and phone systems both on-premise or cloud-based. Features Over a GB of available space for user uploaded audio: up to 135 files for stored messages, bells, and other audio created by the user Calendar-based bell scheduler supporting multiple schedule files and time-based recurring event management Supports call-in stored message recording Voice prompting and password controlled zones Supports 100 paging groups accessed via DTMF Paging Prioritization Loud/Night Ringer function - second SIP extension Supports user-uploadable ring and alert tones, with the option to send a stored message with each of the 100 page groups Supports delayed pages, i.e. call buffering Support for security code to prevent unwanted SIP calls Supports multiple user accounts, with distinct log in credentials Can send multicast to all Poly channels   Fault sense input Line-in for background music Line-out connector NTP-based internal clock Audio-controlled onboard relay for amplifier mute control Rack mountable   TLS 1.2 and SRTP enhanced security for IP Endpoints in a local or cloud-based environment HTTP command interface HTTPS web based configuration Support for Cisco SRST resiliency Autoprovisioning via HTTPS, HTTP or TFTP Configurable event generation for device health and status monitoring Specs Ethernet I/F 10/100 Mbps Protocol SIP RFC 3261 Compatible Power Input PoE 802.3af or 48VDC (not included) Line In: Input Signal Amplitudes Input Impedance 2.0 VPP Maximum 10k Ohm Line Out: Output Signal Amplitudes Output Level Total Harmonic Distortion Output Impedance 2.0 VPP Maximum +2dBm nominal 0.5% maximum 10k Ohm Page Port Output Balanced 600 Ohm 5VPP Payload Types G.711 a-law, G.711μ-law, G.722 and G.729 Network Security TLS 1.2, SRTP, HTTPS Operating Range Temperature: -40 degrees C to 55 degrees C (-40 degrees F to 131 degrees F) Humidity: 5-95%, non-condensing Storage Temperature -40 degrees C to 70 degrees C (-40 degrees F to 158 degrees F) Storage Altitude Up to 15,000 ft. (4573 m) Dimensions* Length: 6.11 inches [155.19 mm] Width: 4.05 inches [102.87 mm] Height: 1.15 inches [29.21 mm] Weight Boxed Weight 1.2 lbs. [0.54 kg] 1.8 lbs. [0.82 kg] Compliance CE: EMC Directive – Class A EN 55032 &amp; EN 55024, LV Safety Directive – EN 62368-1; RoHS Compliant; FCC Part 15 Class A; Industry Canada ICES-3 Class A; IEEE 802.3 Compliant; TAA Compliant Warranty 2 Years Limited Part Number 011146 *Dimensions are measured from the perspective of the product being upright with the front of the product facing you. FAQs How do I update my firmware? Go to the Downloads tab, click on the serial number range matching your device and download the firmware compatible with it. To update the firmware, unzip the file and log in to the web GUI for the device you are trying to upgrade. Navigate to the Firmware tab and browse for the firmware file you just downloaded. Select and upload that file. Do not reboot, the device will do it for you. For more information, please check your product’s Operations Guide, also available under the Downloads tab. PLEASE NOTE: Firmware is not backwards compatible for V3 devices. If you are downgrading or trying to update a pre-V3 device, please contact CyberData’s Technical Support Department first to ensure the device does not get damaged. We also recommend you export a copy of your current configuration BEFORE updating, should a loss of power or another issue occur that would potentially lose your settings. Is this device compatible with my service provider or IP-PBX server? CyberData VoIP products are compatible with IP-PBX servers that support standard SIP protocol. You can find a full list of IP-PBX servers that CyberData products have been validated on by going to Connecting to Compatible IP-PBX Servers. If you do not see your IP-PBX on this list, feel free to contact CyberData’s Technical Support Department for more information. Is this device compatible with my analog amplifier? Our page, Connecting to Compatible Analog Amplifiers, portrays a list of third party analog amplifiers that CyberData has validated compatibility. If you do not see your amplifier on the list, please contact CyberData’s Technical Support Department. How does this product support 100 zones? The CyberData Paging Server can send out multicast onto the local subnet by dialing the device and choosing one of the zones (0-99). The recipient will need to be multicast capable, on the same subnet as the Paging Server and configured to receive the stream by providing it the unique multicast address and port number that the audio will be streamed through. What is multicast? IP multicast is a technique for one-to-many communication over a local IP network. IGMP multicast is sent via UDP packets from a multicast server to a multicast receiver. This stream scales to a larger receiver population by not requiring prior knowledge of who or how many receivers there are. Multicast uses network infrastructure efficiently by requiring the source to send a packet only once, even if it needs to be delivered to many receivers. The network replicates the packet in order to reach multiple receivers only when necessary. Multicast is a great alternative to SIP registration as it does not require that the recipient of the stream to register as an extension on an IP-PBX server. CyberData products support both regular IGMP multicast as well as proprietary Polycom Group Paging. How do I page to phones that can listen to Multicast? See the CyberData Technical Support Knowledgebase article providing documents How Do I Page to Phones That Can Listen to Multicast? Which IP Phones do you recommend for setting up a Peer to Peer SIP call with this device? See SIP Point-To-Point Configuration If I wanted to power the device by using the auxiliary power connector, what type of power supply do I need? The power connection requires a +48v 380mA (min) power brick. The connector is 2.5mm with a positive center. Cisco's CP-PWR-CUBE-3 power brick is approved. For additional support or answers to questions not covered on this page, who should I contact? CyberData’s Technical Support Department How many users can the SIP Paging Server support? There is currently no limit to the number of users. How many Poly channels can the paging server page to? The paging server's page groups (PGroups) can be set to page to a specific channel. This allows for each PGroup to page to a different channel. How many schedules can the paging server support? There is no limit. Schedules are now stored on the unit itself, no need to manage schedule files separately on a computer. Installation Typical Installation Typical School Use Case Dimensions Connections Downloads All firmware files include release notes and an autoprovisioning template. Please back up your configuration before uploading firmware, and restore factory defaults after the upload is complete. Serial Number begins with 1460xxxxx Documentation Description Date PDF Datasheet DATE:5/9/24 PDF Quick Start Guide DATE:12/8/16 PDF Quick-Reference Placemat DATE:12/8/16 PDF Operations Guide (firmware version 7.2.0) DATE:5/27/15 PDF Operations Guide (firmware version 7.1.0) DATE:10/8/14 PDF Operations Guide (firmware version 6.3.1) DATE:11/13/13 PDF CyberData Night Ringer Explained DATE:3/25/20 PDF CyberData SIP Paging Server and SIP Phone Compatibility List DATE:8/2/16 PDF Configuring VTech ErisTerminal SIP Deskset Phones to Listen to Your CyberData SIP Paging Server DATE:8/2/16 PDF Configuring an Aastra Phone to Listen to your CyberData SIP Paging Server DATE:4/3/13 PDF Configuring a snom Phone to Listen to your CyberData SIP Paging Server DATE:9/3/13 PDF Configuring a Cisco SPA5XX Series Phone to Listen to your CyberData SIP Paging Server DATE:4/3/13 PDF Yealink Multicast Configuration Guide DATE:10/31/19 PDF CyberData SIP Paging Server and SIP Phone Compatibility List DATE:6/10/15 PDF Configuring a Polycom Phone to Listen to Your CyberData SIP Paging Server DATE:10/15/19 PDF Polycom Multicast Diagram DATE:3/17/15 Firmware, Drivers &amp; Utilities ZIP Firmware 7.2.0. Note: "700-uImage-pserver_sig" must be used to downgrade from versions greater than v7.0.0. Note: Users will not be able to upgrade directly from versions older than v7.0.0 to versions greater than v7.0.0. Users will have to upgrade to v7.0.0 then move on from there. DATE:3/13/15 ZIP Firmware 7.1.0. Note: "700-uImage-pserver_sig" must be used to downgrade from versions greater than v7.0.0. Note: Users will not be able to upgrade directly from versions older than v7.0.0 to versions greater than v7.0.0. Users will have to upgrade to v7.0.0 then move on from there. DATE:11/13/13 ZIP Firmware 7.0.0 with signature. Note: "700-uImage-pserver_sig" must be used to downgrade from versions greater than v7.0.0. Note: Users will not be able to upgrade directly from versions older than v7.0.0 to versions greater than v7.0.0. Users will have to upgrade to v7.0.0 then move on from there. DATE:8/27/13 ZIP Firmware 7.0.0 with no signature. Note: "700-uImage-pserver_nosig" must be used to upgrade from previous versions to v7.0.0. Note: Users will not be able to upgrade directly from versions older than v7.0.0 to versions greater than v7.0.0. Users will have to upgrade to v7.0.0 then move on from there. DATE:8/27/13 ZIP Firmware 6.3.1 with signature. Note: "631-uImage-pserver_sig" must be used to downgrade from v7.0.0 only to v6.3.1. DATE:8/27/13 ZIP Firmware 6.3.1 DATE:11/20/12 ZIP Firmware 6.2.0 DATE:11/16/12 ZIP Firmware 6.0.7 DATE:9/8/11 ZIP The Discovery Utility scans the network for CyberData devices. Serial Number begins with 1461xxxxx Bell Scheduler Description Date FIRST: Register your device - User Uploadable Bells - Documentation Description Date PDF Datasheet DATE:5/9/24 PDF Quick Start Guide DATE:3/7/17 PDF Quick-Reference Placemat DATE:2/15/18 PDF Operations Guide (firmware version 12.2.0) DATE:5/28/20 PDF Operations Guide (firmware version 12.1.0) DATE:5/7/19 PDF Operations Guide (firmware version 12.0.0) DATE:5/18/18 PDF Operations Guide (firmware version 11.5.4) DATE:4/18/16 PDF Operations Guide (firmware version 11.5.2) DATE:2/9/16 PDF Operations Guide (firmware version 11.5.0) DATE:12/8/15 PDF Operations Guide (firmware version 11.3.0) DATE:8/5/15 PDF CyberData Night Ringer Explained DATE:3/25/20 PDF CyberData SIP Paging Server and SIP Phone Compatibility List DATE:8/2/16 <a href="https://files.cyberdata.net/assets/011146/931288