RST CLEVLND UVDTF

UV DTF cup wrap is sized for 16 oz Libbey Glass Cans -Listing is for one UV DTF Wrap (cup not included) -Permanent and waterproof -Hand wash only How to Apply MAKE SURE SURFACE IS CLEAN BEFORE APPLYING THE TRANSFER DO NOT PREP THE SURFACE WITH ALCOHOL BEFORE APPLYING THE TRANSFER. CAN BE USED ON ANY HARD SMOOTH SURFACE 1. Squeegee transfer front and back before use, measure and trim design if needed then with the design facing down peel off the backing. 2. Place the decal on the surface; make sure the design is in your desired position. Please keep in mind that the adhesive is very strong, once it touches the surface you will not be able to change the position. 3. Press the decal down firmly from the center of the glass outward. Be sure to not let the ends overlap. Push out any air bubbles with your hands, or squeegee. 4. Continue to rub all over the design with your fingers, use a squeegee tool if you have one. Rub in the design thoroughly to properly adhere to the surface. 5. Begin to peel clear film off VERY slowly, take your time to avoid any issues! Peeling fast can cause the design to crack.   (L)  new uv-5157